Vetotop UC373 is a specially formulated fast drying line marking paint applied in one coat for marking lines on concrete, epoxy, or polyurethane surfaces. Vetotop UC373 paint is based on Polyester-Polyurethane.
The surface should be sound, clean, dry, and free from loose material, laitance, dirt, oil, grease, or other contaminants. If needed, wash the surface with detergent and then with clean water. Allow drying completely before application. Do not use solvent to clean the surface before applying the product.
Mix the contents of the container thoroughly before application.
Apply Vetotop UC373 with a brush, roller, or airless spray gun. It may be needed to dilute the product with 5 to 10% Vetonit Solvent XX300 if an airless spray gun is used. The nozzle tip of the gun should be from 4-6 mm. Apply the paint with a pressure of 30-40 psi.
Apply Vetotop UC373 at a rate of 5m2/Liter (200 microns wet). If another coat is needed to build up the thickness, then apply the second coat after the first one is totally dry. For the light reflection, proper glass beads with a size of <200 microns can be sprinkled on top of the applied coating while still wet.
Clean tools with Vetonit Solvent XX300 promptly before material hardens. Cured material must be mechanically removed.