غراء المشاريع الأول

The surface should be sound, clean, free from loose material, oil, grease, laitance, dirt, curing compound, etc. 

Wet all surfaces with clean water before Premium Project Fix’s application. The surface should appear damp with no water pooling.

For the mortar adhesive preparation, pour into a container 14- 16 liters of water for each 50 Kg bag of Premium Project Fix.

Add the powder to the water and mix using a low- speed electric drill fitted with a suitable paddle until achieving a uniform, lump-free consistency. Allow the mixed material to stand for about 10 minutes and remix briefly without adding further water.

Blend Premium Project Fix manually for small quantities and maintain the correct amount of powder to water.

If required, add 0.5 Ltr of Vetobond AB432 to the mixing water, followed by powder’s addition. Use the mixed material within 2 hours. 

Do not add water to the mixture once the mortar adhesive starts to harden.

Spread the mixed mortar adhesive and firmly press it onto the surface that will be tiled; work with a notched trowel. Spread the mortar adhesive to an area that can be tiled within 10-15 minutes. Press the tiles firmly over the mortar adhesive and immediately knock them into the desired position. Adjust the position of the tiles, if required, within its adjustability time of 10-15 minutes after installation.

Allow the installed tiles to remain undisturbed for at least 48 hours. Mortar adhesive must not rise between the tile joints higher than halfway the thickness of the tiles. It is recommended to use Vetonit Tile Grout to fill the joint gaps after 2 days of tile installation.

Clean tools and equipment with water immediately after use. Hardened materials will require removal by mechanical means.