ڤيتونيت كول توب

All surfaces should be dry and free from contamination, such as oil, grease, loose particles, decayed matter, moss algal growth, laitance, and all traces of mold release oils and curing compounds. This is best achieved by lightly grit-blasting the surface. Where moss, algae, or similar growths have occurred, treatment with a proprietary biocide should be carried out after the grit-blasting process. Spalled and deeply disintegrated concrete should be removed to sound concrete and repaired with a Saveto repair system.

Concrete substrates should be at least 14 days old.

Apply Vetonit Cool Top by brush, roll, or airless spray machine. Prime porous cementitious surfaces with Vetoprime AP443 at the rate of 5m2/liter and allow it to dry before applying the first coat. Use the first coat of Vetonit Cool Top and allow it to cure for 4 - 12 hours depending on the ambient temperature.

Apply the second coat perpendicular to the first coat.

It is recommended for heavy pedestrian traffic to use polyester fleece reinforcement, embedded firmly in the second coat while wet, and a third coat should be applied.

Remove Vetonit Cool Top product from tools, equipment, and mixers with clean water before the initial set. Cured material can only be removed mechanically.