Vetonit Tile Grout

Tile adhesive thickness should not exceed half the thickness of the tile pieces. Excess mortar should be removed.

All the joints should be free from dust, loose materials & traces of foreign materials, etc. Neutralise the tiles’ water absorption by applying clean potable water. Do not let water pool in the joints.

For Grout mortar preparation, pour 5.2 - 6.8 litres of water into the mixing container then add a 20 kg bag of Vetonit Tile Grout powder and mix with a low-speed electric drill fitted with a suitable paddle until a uniform, lump-free consistency is achieved. Allow the mixed material to stand for about 5 - 10 minutes and remix briefly without adding water

You can blend Vetonit Tile Grout manually for small quantities. however, you must maintain the correct ratio of powder to water. Do not add water to the mixture once the mortar grout begins to harden.

Apply Vetonit Tile Grout using either a rubber blade, a grouting trowel, a rubber spatula, or a sponge. Spread the mixed grout diagonally across the tile joints and firmly press it with a rubbing pad covered with a sponge or a rubber spatula to ensure all the gaps are filled.

Remove excess grout on tiles using the same tool. After 15 - 30 minutes, the grout should be initially dry, depending on the ambient temperature & humidity.

Clean the tiles and remove all excess material with a wet sponge. After full drying, clean the surface of the tiles with a dry cloth or disposable cotton towels. When washing & drying the tiles, avoid rubbing the tile joints too deep. Keep the grout moist for the first 2 days after application to achieve optimal hardening.

For further information regarding the suitable substrates and tiles on which this product can be safely applied, please contact Saveto’s technical department.

Clean tools and equipment with water immediately after use. Hardened materials will require removal by mechanical means.mechanical means.