Submitted by webmaster on 19 May 2024

Vetoproof TOP

Single-component flexible acrylic copolymer-based waterproofing membrane.

Vetoproof TOP is a single-component cold liquid applied flexible acrylic copolymer-based elastomeric waterproofing membrane designed to offer excellent long term waterproofing characteristics and resistance to UV degradation, whilst remaining flexible to give excellent crack bridging ability. Vetoproof TOP is an all-cross-linking-acrylic making it resistant to yellowing, color fading, and has excellent dirt-pick-up resistance.

Uses

  • Waterproofing of concrete, asbestos, metal, tile, cement, and gypsum board surfaces.
  • Waterproofing flashing roof edges, gardens, basement, and sand which application.
  • Protecting spray polyurethane foam insulation from UV rays.
  • As a decorative overlay on bituminous membranes and over existing terrazzo tiles.
  • Waterproofing of corrugated sheets and sloped roofs.

Advantages

  • Flexible elastomeric product.
  • UV and color stable.
  • Can achieve 1 mm thickness in 2 coats.
  • Excellent weathering resistance.
  • It can be applied over sloped roofs.
  • Easy to maintain and trafficable.
  • Dirt-pickup resistance.
  • It reflects sun rays, making it a cool roof coating.
  • Easy to apply by brush, roller, and spray.
  • Withstands substrate movements.
  • Excellent crack bridging capability.

Usage Instructions

All surfaces should be dry and free from contamination, such as oil, grease, loose particles, decayed matter, moss algal growth, laitance, and all traces of mold release oils and curing compounds. This is best achieved by lightly gritblasting the surface. Where moss, algae, or similar growths have occurred, carried out treatment with a proprietary biocide after the grit-blasting process. Remove spalled and deeply disintegrated concrete to sound concrete and repair it with a saveto repair system.

Concrete substrates should be at least 14 days old; bituminous substrates should be 3 to 6 months old before overcoating with Vetoproof TOP.

Apply Vetoproof TOP by brush, roller, or airless spray machine. Prime porous cementitious surfaces with Vetoprime TOP at the rate of 5 m2/liter and allow it to dry before applying the first coat. Apply the first coat of Vetoproof TOP and allow it to cure for 4 - 12 hours depending on the ambient temperature.

Apply the second coat perpendicular to the first coat and allow it to cure.

It is recommended for heavy pedestrian traffic to use fiberglass scrim reinforcement, embedded firmly in the second coat while wet, and a third coat should be applied.

Remove Vetoproof TOP product from tools, equipment, and mixers with clean water before the initial set. Cured material can only be removed mechanically.

DOWNLOADS

EXPLORE MORE PRODUCTS

Vetonit Cool Top

Hybrid Acrylic Polyurethane Roof Waterproofing.

Waterproofing

Vetoproof AM763

Acrylic Waterproofing.

Waterproofing

Vetoproof AM764

Pure Acrylic Waterproofing.

Waterproofing