Submitted by webmaster on 18 May 2024

Vetotop UC372

Chemical, scratch & UV-resistant polyurethane floor & wall coating (High performance, matt finish).

Vetotop UC372 is a two-component, solvent-based, polyurethane topcoat. It is used as a UV-resistant sealer over concrete, epoxy, and polyurethane flooring & coating systems (From the Vetotop range). Due to special additives and adhesion promoting chemicals, this product provides excellent penetration and adhesion to minimally profiled concrete. Vetotop UC372 is a sealed system that provides outstanding UV stability on exterior applications as it cures rapidly and withstands all types of weather exposure. When used as a finish coat, Vetotop UC372 provides a hard, matt finished surface that resists scratching well and is easy to clean.

Uses

  • It provides long-term protection for car parks, factory floors, warehouses, laboratories, loading decks, ramps, showers, kitchens, dairies, and breweries.
  • An ideal UV Resistant top coat for multiple flooring systems including concrete, epoxies, and aromatic elastic polyurethanes

Advantages

  • Fast & easy application.
  • Superior abrasion, scratch, and chemical resistance.
  • Low maintenance cost.
  • Hygienic, impervious, and easily cleanable.
  • Available in 8 standard colors (with the possibility of custom RAL colors).
  • High bonding properties (stronger than concrete cohesive strength).
  • Weather-resistant & UV stable (will not degrade, chalk, or turn yellow when exposed to UltraViolet light).

Usage Instructions

The surface should be sound, clean, free from loose material, grease, laitance, dirt-curing compounds, etc. 

Laitance and weak surface layers must be removed using mechanical methods such as grinding or blasting to provide a sound, well-profiled surface. Use an epoxy mortar from the Vetorep ER range to repair all necessary areas before applying. 

New concrete floors should be at least 28 days old with a moisture content of less than 5% (test the substrate’s moisture conditions if an earlier application is necessary).

Mix the base & hardener together for 3 minutes using a slowspeed mixer. Make sure you follow our mixing guidelines and procedures carefully. Scrape the container of any residue and do NOT add solvent thinners at any time.

Apply Vetotop UC372 using a roller so the application coverage rate is at 5 m2/liter per coat (@ 100 microns DFT).

 Do not apply when humidity exceeds 75% or when the temperature of the coated surface is less than 3°C above the dew point. 

Vetotop UC372 can be applied as a single coat or multi-coat sandwich system incorporating Vetograin products to give a slip-resistant finish. For more information, please refer to the Vetograin Technical Data Sheet.

Expansion joints in the existing substrate must be retained and continued through the Vetotop UC372 topping. Saveto has a range of joint sealants specifically designed for flooring purposes (See the product data sheet of Vetoflex PS782).

Clean tools and equipment with Vetonit Solvent XX300 immediately after use.

DOWNLOADS

EXPLORE MORE PRODUCTS

Vetotop UC363

Traffic Deck Polyurethane Waterproofing Membrane.

Flooring

Vetotop EC498

Solvent-Free Epoxy Coating.

Flooring

Quick Floor Fix

Rapid set cementitious repair mortar.

Flooring