Tiling Systems
Vetoset EA454

Water cleanable, chemical resistant waterproof epoxy tile adhesive

Uses
Laying virtually all types of tiles to cementitious and metal substrates
Chemical processing plants
Industrial Kitchens, food plants, and hospitals
Swimming pools and aquariums
Fast Download
Catalogues
Saveto Tile Adhesives & Grouts Professional Product Range Brochure
download (*.pdf 2.34Mb)
Technical Information
Product Description

Vetoset EA454 is a three-component epoxy-based, water cleanable, chemical resistant, and waterproofing tile adhesive to be used with most types of tiles, including ceramic, porcelain, glass mosaic, marble, granite,...etc. The product is composed of 3 components consisting of a resin base, hardener, and selected fillers.

Advantages
  • Easy to apply.
  • Excellent mechanical and physical properties.
  • High bond strength.
  • High chemical resistance.
  • Water cleanable.
COMPLIANCE STANDARD
  • ANSI A118.3
  • ANSI A108.6
  • BS EN 12004:2010 as R2T
  • SASO ISO13007-3 as R2T
Packaging & Coverage

Vetoset EA454 supplied in 8 Kg kit (3 components)

Coverage: 4.5-5.5m2 / kit @1mm thickness.

Stated consumption data are for general guidance. Actual consumption depends on the nature of substrate, method of application, and wastages.

Shelf Life & Storage

The original sealed bags & containers of Vetoset EA454 have a shelf life of 12 months, provided it is stored clear of ground in a dry, shaded place below 35ºC.

Colors
Beige Viscous Paste
Application Information
Instructions for use

Mixing

To ensure proper mixing, use a mechanically powered mixer or heavy-duty slow speed drill fitted with a suitable paddle.

Stir the base (component A) and the hardener  (Component B) individually to disperse any settlement. Pour the entire contents of the base and hardener into a suitable size container and mix mechanically for 2 minutes.  Add the Filler (component C) and mix for another 3 minutes until achieving a uniform, lump-free consistency.



Application

Apply a thin layer of the adhesive onto the substrate using the flat edge of the trowel. Comb the adhesive with a suitable notched trowel horizontally to achieve a 2 - 6 mm bed thickness. Place the tiles with firm pressure to ensure proper contact with the adhesive.

It is always better to work in a manageable area that can be tiled within the adhesive's open time. Leave the tiled surfaces for 24 hours before grouting.



Cleaning

Clean tools and equipment with water immediately after use. Remove the hardened material using mechanical means.

Surface Preparation

The substrate should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, or any other substance that might impair the quality of bond with the substrate.

Limitation
  • Do not apply at a temperature below 5ºC.
  • For large-sized tiles, it is good practice to back butter the tile back surfaces with the adhesive to ensure 100% coverage.
Additional Information
Health & Sefety

Vetoset EA454 should not come into contact with skin and eyes or be swallowed. Some people are sensitive to resins, gardeners, and solvents. Wear suitable protective clothing, gloves, and eye protection. If working in confined areas, suitable respiratory protective equipment must be used.

The use of barrier creams provides additional skin protection. In case of skin contact, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent. In case of contact with eyes, rinse immediately with plenty of clean water, and seek medical advice. If swallowed, seek medical attention immediately - Do not induce vomiting.

Vetoset EA454 is non-flammable.

For further information, please refer to the material safety data sheet.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products because it has no direct or continuous control over where or how its products are applied, whether or not following any advice, specification, recommendation, or information given by us. Saveto has the right to change any of the technical datasheets' specifications upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year. Our technical data sheets are continuously updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Ceramic Tile Fix

Weather-resistant cementitious adhesive for ceramic tiles

Pool FIX

Polymer modified water resistant adhesive for fixing swimming pools, fountains & water tanks tiles

 

Pool Grout

Water-resistant grout for swimming pool tile joints

Porcelain Tile Fix

Polymer modified weather resistant adhesive for porcelain tiles.

Premium Project Fix

High quality ceramic tile adhesive for projects.

 

view more
Featured Product
Vetotop UC371

High performance, chemical, scratch & UV resistant polyester polyurethane floor & wall coating

Uses
Long term protection of car parks and floors in factories, warehouses, laboratories, loading decks ramps, swimming pools, showers, kitchens, dairies, breweries.
UV Resistant top coat over flooring systems including concrete, epoxies, aromatic elastic polyurethanes,...etc.
It can be applied to floors, walls, and ceilings.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com