Primers and Ancillary
Saveto PP Fiber

High Quality Monofilament Polypropylene Fibers

Uses
Various Types of Concrete, Shotcrete
Cementitious overlays, stamped concrete, screeds, driveways, render mortars
Industrial & Warehouse floors.
Patch repair on precast elements
Water Retaining Structures.
Fast Download
Technical Data Sheet
download (*.pdf 0.32Mb)
Technical Information
Product Description

Saveto PP Fiber is a high performance monofilament Polypropylene fiber developed reduce microplastic shrinkage and cracking during the curing of concrete and Improves the strength characteristics of cohesiveness and surface quality of concrete, its avaible in 6mm length of Plaster and renders and 12mm length for concrete .Its suitable for hot and tropical climate Fiber is also used in mixtures to increase the strength in bending and tension and reducing the risk of delamination. Fiber is an economical and quality alternative to steel mesh controls the formation of cracks.

Advantages
  • Prepacked for immediate use
  • Reduces microplastic shrinkage and cracking of concrete
  • Replaces Reinforcing mesh.
  • Reduces Water and chemical permeability.
  • Increase the strength in bending and tension
  • Does not rust, disperses uniformly throughout the mix
  • Improves concrete freezing-thawing resistance
  • Improve impact resistance of concrete, folding resistance, fatigue resistance, seismic performance
  • Improve the durability of the concrete and aging resistance
  • Improve the fire performance of concrete.
Compiliance Standard

Saveto PP fiber complies with ASTM 1116

Packaging & Coverage

Saveto PP Fiber is supplied in 0.9kg Bage

Shelf Life & Storage

Original sealed bag of Saveto PP Fiber has a shelf life of 12 months provided it is stored clear of ground in a dry and shaded place below 35ºC.

Colors
White
Application Information
Instructions for use

Design Criteria

Slip Saveto PP Fibers is a high quality, 100% virgin polypropylene, in compliance with ASTM1116 used a secondary reinforcement and reduces the occurrence of plastic settlement cracking whilst enhancing the surface properties and durability, abrasion and integrity. It replaces wire mesh reinforcement

Application
Concrete Placing Standard placement procedures for concrete should be followed. Due to fiber efficiency, minor mix design modifications may be required depending on the application. Saveto PP Fiber is added to the mixer before, during or after batching the other concrete materials. Mixing time of at least 5 minutes at mixing speed is required as specified in ASTM C 94.

Dosage
Saveto PP fiber is ready to use at 0.900 kg/m3 of the mortar or concrete. For Shotcrete works refer to Saveto Technical Department for specific dosage recommendations.

Overdosing
Overdosing of Saveto PP fibers will generally produce a reduction in workability and an increase in the cohesiveness of the mix.

Compatibility
Saveto PP Fiber is compatible with all commonly used concrete admixtures and performance enhancing chemicals.

Additional Information
Health & Sefety

Saveto PP Fiber is non-flammable and non-hazardous.
Refer to Material Safety Data Sheet for further information.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Ready Mix Bond

Multi-purpose bonding agent & admixture

Vetobond PB436

Polymeric soil stabilizer

Vetobond PB434

Polymeric bonding agent, waterproof mix enhancer & primer

Vetobond PB433

Versatile resin adhesive, cement modifier, bonding agent & sealer

Vetobond EB431

Water dispersible epoxy bonding agent to bond old to new concrete

view more
Featured Product
Vetogrout UR711

Flexible non-foaming polyurethane injection resin.

Uses
Injection of concrete and masonry cracks to form a flexible seal.
Used in conjunction with Vetogrout UR710 for crack injection in wet conditions..
Crack injection in live crack cases.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com

Saveto Company Name