Skip to main content
Submitted by webmaster on 19 May 2024

Vetonit Cool Top

Single component liquid applied flexible hybrid roof waterproofing membrane.

Vetonit Cool Top is a single-component cold liquid-applied elastomeric waterborne hybrid polyurethane-acrylic roof waterproofing membrane. The product is white in color with a high solar Reflectance index (SRI) that ensures better thermal roof insulation. Saveto Cool Top has a high resistance to yellowing, and color fading, as well as excellent dirt pick up resistanc.

Uses

  • Single component liquid applied flexible hybrid roof waterproofing membrane.
  • Waterproofing of corrugated sheets and sloped roofs.
  • Protecting spray polyurethane foam insulations from UV rays.
  • Exposed roofs with many details and complex geometry.

Advantages

  • Reflects sun rays which enhance energy efficiency by reducing cooling costs.
  • Highly elastic and crack-bridging.
  • Easy to use single component.
  • UV and color stable.
  • Excellent weathering resistance.
  • It can be applied over sloped roofs.
  • Easy to maintain.
  • Dirt-pickup resistance.
  • Resists impact damage and foot traffic.
  • Excellent to refurbish existing roofs without replacing them.
  • The right solution for small and complicated roofs.

Usage Instructions

All surfaces should be dry and free from contamination, such as oil, grease, loose particles, decayed matter, moss algal growth, laitance, and all traces of mold release oils and curing compounds. This is best achieved by lightly grit-blasting the surface. Where moss, algae, or similar growths have occurred, treatment with a proprietary biocide should be carried out after the grit-blasting process. Spalled and deeply disintegrated concrete should be removed to sound concrete and repaired with a Saveto repair system.

Concrete substrates should be at least 14 days old.

Apply Vetonit Cool Top by brush, roll, or airless spray machine. Prime porous cementitious surfaces with Vetoprime AP443 at the rate of 5m2/liter and allow it to dry before applying the first coat. Use the first coat of Vetonit Cool Top and allow it to cure for 4 - 12 hours depending on the ambient temperature.

Apply the second coat perpendicular to the first coat.

It is recommended for heavy pedestrian traffic to use polyester fleece reinforcement, embedded firmly in the second coat while wet, and a third coat should be applied.

Remove Vetonit Cool Top product from tools, equipment, and mixers with clean water before the initial set. Cured material can only be removed mechanically.

EXPLORE MORE PRODUCTS

Vetoproof AM763

Acrylic Waterproofing.

Vetoproof AM764

Pure Acrylic Waterproofing.

Vetoproof AZL

Flexible hybrid polyurethan roof waterproofing membrane.