Skip to main content
Submitted by webmaster on 18 May 2024

Vetotop EC493

High performance thin epoxy topping (Solvent-based & self-priming).

Vetotop EC493 is a two-component, high-performance, solvent-based, single-coat application, epoxy coating system that bonds perfectly to various substrates like concrete, metal, wood, stone, etc. Once cured, the product has excellent abrasion and chemical resistance. Vetotop EC493 provides an attractive, durable, and easily cleanable floor finish. When used on floors and walls, Vetotop EC493 enhances the environment’s lighting due to the product’s reflective properties.

Uses

  • For floor and wall coating in various industrial applications such as production assembly areas, workshops, dairies, bottling plants, breweries, kitchens, showrooms, etc.
  • Can be used as a sealer for Vetotop CL and XT ranges.
  • Ideal for wet working areas subject to chemical spillage.

Advantages

  • Self-priming application.
  • Easily applied in a single coat.
  • High abrasion and chemical resistance.
  • Low maintenance cost.
  • Hygienic, impervious, and easily cleaned.
  • It has a slip-resistant finish.
  • Available in 8 standard colors (with the possibility of custom RAL colors).
  • High bonding properties (stronger than concrete cohesive strength).
  • Economic installation.

Usage Instructions

The surface should be sound, clean, free from loose material, grease, laitance, dirt-curing compounds, etc. Remove laitance and weak surface layers mechanically (grinding or blasting) to provide a sound, well-profiled surface. 

Before applying the product, make all the necessary repairs using an epoxy mortar from the Vetorep ER range. New concrete floors should be at least 28 days old with a moisture content of less than 5% (Test the substrate’s moisture condition if you need to apply it earlier than 28 days). 

Grit blast steel substrates to surface quality SA21 /2 (BS 4232:Second Quality); Apply within 2 to 4 hours after blasting.

Thoroughly stir the individual components of Vetotop EC493 before mixing them together. Pour the entire contents of the hardener container into the base container and mix the materials thoroughly for at least 3 minutes. We recommend using a heavy-duty, slow speed, flame-proof, or air-driven drill fitted with a mixing paddle.

Apply the Vetotop EC493 mixture to the prepared surface using a brush or a roll made from lambswool. Ensure that the area is completely coated and that the ‘ponding’ of the material does not occur.

The applied coating can receive foot traffic in 24 hours. However, allowing it to cure for 7 days can achieve the full chemical resistance properties of the material and make it ready to receive vehicular traffic.

Remove Vetotop EC493 from tools and equipment with Vetonit Solvent XX400 immediately after use. Hardened material can only be removed mechanically.

EXPLORE MORE PRODUCTS

Quick Floor Fix

Rapid set cementitious repair mortar.

Vetotop CS360

Premixed Cement Screed 10-100 mm.

Vetotop EC495

Solvent-Based Epoxy Coating.