Submitted by webmaster on 6 October 2024

Plastermix-S PLS222 - AE

Sprayable Premixed Cementitious Plaster & Render.

Plastermix-S PLS222 is a cement-based plastering/rendering material composed of hydraulic binders, selected manufactured sand, aggregates, and special additives. It is supplied as a dry powder in bags/bulk ready to use onsite, which requires only the addition of clean water to produce cohesive mortar. Plastermix-S PLS222 is specially designed for application by spray machine. It can be used manually if required, contains a special shrinkage control additive, and provides good adhesion with a uniform color surface.

Uses

  • Plaster and Render for Internal and External use. 
  • Ideal for AAC Block Walls. 
  • Plaster for Dry and Wet Areas. 
  • Also as Plaster for Concrete and CMU walls.

Advantages

  • Fast mixing application using a spray machine. 
  • Applied directly on AAC block walls without the need for Key coat.* 
  • Factory controlled pre-blend ensures consistently high quality. 
  • Requires only the addition of water on-site at the time of usage. 
  • Improved workability & curing. 
  • Easy application with uniform work flow enables high productivity & superior finishing. 
  • Strong adhesion on a variety of substrates. 
  • Internal & external applications. 
  • Shrinkage control reduces surface cracks. 
  • Suitable for humid & dry conditions. 
  • Free from Asbestos and complies with Green Building Regulations.

Usage Instructions

The substrate should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc. Before Plastermix-S PLS222 application, damp the entire surfaces with clean potable water, and the substrate should be neutralized surface at the time of the Plastermix-S PLS222 application.

Apply vetonit Spatter Dash-MC SDM212 at 4 - 6 mm and cure for at least 3 days.

Add to the mixing container 7 - 8 liters of water for each 50Kg bag of Plastermix-S PLS222. Add the powder to the water and mix with a mechanical plaster mixer or low-speed electric drill fitted with a suitable paddle for 3-4 minutes until achieving a uniform, lump-free consistency.

The recommended water flow rate is 350 - 550 Ltr/ hr for the applications that use a plastering machine, depending on the rotor stator status. Use the mixed material within 90 min. Do not add water to the mix once the mixed mortar starts to harden.

Apply Plastermix-S PLS222 on rough or smooth surfaces using a spray machine at a thickness of 10 - 20 mm per layer. Rod or level to a uniform thickness.

When the plaster starts to set, level the material to the desired appearance using suitable plastering trowels.

For multiple layers, follow the practice in ASTM C926, 10 - 15 mm/layer with a rough finish, a cure for two days /layer before applying the second one. Finish the final layer as desired.

After the surface appears stiff but still moist, finish the material surface to achieve the desired appearance.

Cure Plastermix-S PLS222 by spraying water on the surfaces of applied materials every 8-12 hrs for a minimum of 3 days. Cure for more days during hot weather

Clean tools with water before the mortar hardens. After the hardening, remove the residuals mechanically.

DOWNLOADS

Please login to download

EXPLORE MORE PRODUCTS

Masonry Grout Filler - AE

Premixed cementitious masonry grout.

Plasters & Masonry

Gypsum Plaster - AE

Sprayable Premixed Gypsum based Plaster.

Plasters & Masonry

Vetonit Masonry Mortar MMR510 - AE

Premixed Cementitious Masonry Mortar for Concrete Masonry Blocks.

Plasters & Masonry