Submitted by webmaster on 6 October 2024

Premium Fix - AE

Water Resistant Cementitious Ceramic Tile Adhesive.

Premium Fix is a normal cementitious adhesive for ceramic tiles with slip-resistance properties (as per ISO-13007-1 class C1 T description). The material is composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, requiring only the addition of clean water to produce an easily workable mortar. Premium Fix is ideal for fixing ceramic and terrazzo tiles. It should be applied at a thickness of 3 - 10 mm, depending on the substrate’s type and the quality of the tiles.

Uses

  • Can be used with ceramic tiles with a typical open time. 
  • Ideal for tiling on smooth concrete surfaces and plastered walls and screeds. 
  • Suitable for dry & wet conditions. 
  • Suitable for Internal Tiling, Walls and Floors

Advantages

  • Factory-controlled pre-blend ensures consistently high quality. 
  • Requires only the addition of water on-site at the time of usage. 
  • Easy tile installation that enables high productivity. 
  • Superior workability. 
  • Excellent adhesion to a variety of ceramic tiles available in the local market. 
  • Water-resistant. 
  • Suitable for internal applications. 
  • Suitable for horizontal & vertical surfaces. 
  • Free from Asbestos or Asbestos Containing Materials

Usage Instructions

The surface should be sound, clean, and free from loose material, oil, grease, laitance, dirt, curing compound, etc. 

Wet all surfaces with clean water before applying Premium Fix. The surface should appear damp with no water pooling.

For the mortar adhesive preparation, pour 4.8–6.5 liters of water into a container. Add the powder from the 20 kg bag of Premium Fix and mix using a low-speed electric drill fitted with a suitable paddle until a uniform, lump-free consistency is achieved. Allow the mixed material to stand for about 10 minutes, then remix briefly without adding more water.

You can blend Premium Fix manually for small quantities, however, the correct water-to-powder ratio must be maintained.

Do not add water to the mixture once the mortar adhesive begins to harden.

Spread the mixed mortar adhesive, and firmly press it onto the surface that will be tiled; work with a notched trowel. Spread the mortar adhesive to an area that can be tiled within 10 minutes. Press the tiles firmly over the mortar adhesive and immediately knock them into the desired position. Adjust the position of the tiles, if required, within the recommended adjustability time of 10 - 15 minutes after installation.

Allow the installed tiles to remain undisturbed for at least 48 hours. Mortar adhesive must not rise between the tile joints higher than half the thickness of the tiles. It is recommended to use Vetonit Tile Grout to fill the joint gaps after 2 days of tile installation.

For further information regarding the suitable substrates and tiles on which this product can be safely applied, please contact Saveto’s technical department.

Clean tools and equipment with water immediately after use. Remove the hardened material using mechanical means.

DOWNLOADS

Please login to download

EXPLORE MORE PRODUCTS

Porcelain Plus

Highly flexible, polymer-modified cementitious adhesive for large porcelain tile slabs.

Tiling

Porcelain Tile Fix

Cementitious Adhesive for Porcelain Tiles (C2 TE S1).

Tiling

Vetonit Tile Grout

Weather-resistant multipurpose sanded grout for jointing tiles.

Tiling