Submitted by webmaster on 6 October 2024

Spatter Dash-MC - AE

Weather Resistant Polymer Modified Cement based Key Coat for Smooth Dense Concrete.

Spatter Dash-MC cement based key coat composed of hydraulic binders, selected sand aggregates and high performance additives. It is supplied as a dry powder in pre-weighed bags ready to use on site, which requires only addition of clean water to produce easily spray-able mortar. Spatter Dash-MC is a high quality product for multipurpose applications and contains special bonding agent.

Uses

  • Key coat (rush coat, spatter dash) for Smooth concrete (dense and normal). 
  • Key coat for Concrete containing ggbs, micro silica, fly ash. 
  • Key coat for CMU and AAC Masonry walls. 
  • Key coat to cover metalic mesh fixed on joints.

Advantages

  • Eliminates chipping or hacking of concrete. 
  • Compatible for use on normal and dense concrete. 
  • Compatible for use on normal (CMU) and AAC walls. 
  • Factory controlled pre-blend ensures consistently high quality. 
  • Requires only the addition of water on-site at the time of usage. 
  • Manual or spray machine application or by hawk & trowel techniques. 
  • Strong bonding with cement and gypsum based plasters. 
  • Excellent adhesion on a variety of substrates. 
  • Internal & external applications. 
  • Suitable for humid & dry areas. 
  • Suitable for vertical & ceiling surfaces.

Usage Instructions

The substrate should be sound, clean, free from loose material, grease, laitance, dirt, shutter/form release agents, curing compounds, or any other substance that might impair the substrate’s quality bonding.

Before Spatter Dash-MC application, damp the entire surfaces with clean potable water. The substrate should be neutralized surface at the time of Spatter Dash-MC application.

Add to the mixing container 8 - 10 liters of water for each 50Kg bag of Spatter Dash-MC. Add the powder to the water and mix with a mechanical plaster mixer or low-speed electric drill fitted with a suitable paddle for 3-4 minutes until achieving a uniform, lump-free consistency.

Blend Spatter Dash-MC manually for small quantities and maintain the correct amount of powder to water. Mix for approximately 1-2 minutes until achieving a homogeneous mix.

Preferably, apply Spatter Dash-MC in a single coat application to achieve the desired rough thickness of 4-6 mm. Apply mixed material using a mechanical spray or manual spatter machine or hawk & trowel technique. Cover 100% of surface area that will be plastered.

Allow the installed Spatter Dash-MC to remain undisturbed for at least 48 hours.

Cure Spatter Dash-MC by spraying the applied material surface with water every 12hrs for a minimum of 3 days. During hot & dry conditions, allow curing for a minimum of 5 days. It will help to obtain high mechanical strengths and minimize the risk of surface cracks.

Clean all tools immediately after finishing with water. Clean hardened materials mechanically.

DOWNLOADS

Please login to download

EXPLORE MORE PRODUCTS

Masonry Grout Filler - AE

Premixed cementitious masonry grout.

Plasters & Masonry

Gypsum Plaster - AE

Sprayable Premixed Gypsum based Plaster.

Plasters & Masonry

Vetonit Masonry Mortar MMR510 - AE

Premixed Cementitious Masonry Mortar for Concrete Masonry Blocks.

Plasters & Masonry