Apply Vetonit Render in a single layer (3 - 8mm) or multiple layers up to 15 mm on rough or smooth surfaces.
For multiple application layers, each layer should not be thicker than 8mm.
Apply the mixed material using the trowel technique, pushing the first layer hard against the substrate, rod, or screed to achieve a uniform thickness. Immediately start smoothing the surface if you’re using it as a single-layer leveling/repair agent.
The second layer allows the first one to set partially (within 60 - 120 minutes, depending on the weather).
Apply the second layer as described above to the desired total thickness (Less than 15 mm).
Finishing of the surface can be smooth or textured.
If a smoother surface is required, then apply Vetonit finishes as a finishing coat.
Final layer can be kept as final finishing, or it can be painted with ‘vetonit’ line of decorative finishes: ‘vetotouch’.
