Vetoprime CP436 - AE

It is essential to apply Vetoprime CP436 to a sound, clean, and dry surface to achieve maximum bond strength between substrate and coating/repair products.

All rust and scale should be removed from any exposed steel reinforcement by grit blasting techniques or equivalent approved methods until the steel is in a bright condition.

Mix Vetoprime CP436 by slowly adding the powder component to the liquid component. Mix thoroughly for about 2 minutes until a smooth and even consistency is achieved.

Apply two coats of Vetoprime CP436 in a 1 mm thickness approximately) using a brush. Allow each coat to reach the initial setting before the application of the second one.

Clean all tools & equipment with water immediately after use.