Vetoset CA541 - AE

The substrate should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, or any other substance that might impair bond quality with the substrate.

To prepare mortar adhesive, pour into a container 8.5 - 10 liters of water for each 50 Kg bag of Vetoset CA541. 

Add the powder to the water and mix using a low-speed electric drill fitted with a suitable paddle until achieving a uniform, lump-free consistency. Allow the mixed material to stand for about 10 minutes and remix briefly without adding further water.

Apply a layer of the adhesive onto the substrate using the flat edge of the trowel. Comb the adhesive with a suitable notched trowel horizontally to achieve a 10-20 mm bed thickness. Place the tiles with firm pressure to ensure proper contact with the adhesive. 

It is always better to work in a manageable area tiled within the adhesive’s open time. Leave the tiled surfaces for 24 hours before grouting. 

For further information regarding the suitable substrates and tiles on which this product can be safely applied, please contact Saveto technical department.

Clean tools and equipment with water immediately after use. Hardened materials will require removal by mechanical means.