Vetoset EA454 - AE

The substrate should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, or any other substance that might impair the quality of bond with the substrate.

Note: Avoid mixing the product if it is stored in warm place, Put the product in cool place before using it. 

To ensure proper mixing, use a mechanically powered mixer or heavy-duty slow speed drill fitted with a suitable paddle. 

Stir the base (component A) and the hardener (Component B) individually to disperse any settlement. Pour the entire contents of the base and hardener into a suitable size container and mix mechanically for 2 minutes. Avoid over mixing as this will lead to reducing the pot life.

Apply a thin layer of the adhesive onto the substrate using the flat edge of the trowel. Comb the adhesive with a suitable notched trowel horizontally to achieve a 2 - 6 mm bed thickness. Place the tiles with firm pressure to ensure proper contact with the adhesive. 

It is always better to work in a manageable area that can be tiled within the adhesive’s open time. Leave the tiled surfaces for 24 hours before grouting. 

For further information regarding the suitable substrates and tiles on which this product can be safely applied, please contact Saveto technical department.

Clean tools and equipment with water immediately after use. Remove the hardened material using mechanical means.