Submitted by webmaster on 6 June 2024

Vetotouch Décor HB

High-build finish textured decorative coating, flexible, ready-to-use, and based on acrylic emulsion.

Vetotouch Décor HB (High Build) is a single-component, excellent texture topcoat profile that resists all weather conditions. Vetotouch Décor HB is a high-quality product suitable for internal and external applications. It is designed to provide a matt finish with a high-build texture.

Uses

  • Used as a heavy textured decorative coating for interior and exterior surfaces, such as concrete, cement, bricks, plaster, prefabs, gypsum board, masonry work, steel, and galvanized steel surfaces.
  • Suitable for application on wooden surfaces.
  • Ideal for use in educational institutions, residential, commercial, and industrial buildings, prefabs, boundary walls, etc.

Advantages

  • Easy to apply.
  • UV-resistant.
  • Highly durable.
  • Enhance the thermal insulation as a system.
  • Excellent resistance to weather conditions.
  • Good water resistance to prevent penetration of dampness on exterior walls.
  • Can be formed into different rough texture designs using a roller, brush, or spray gun.

Usage Instructions

All new concrete surfaces must be cured for at least 28 days prior to the application of the primer.

For previously painted surfaces, remove old paint completely. The substrate should have sufficient strength and be free from unsound areas, pug holes, protrusions, and pops.

Ensure that the surface is clean, dry, and free from dust, oil, grease, salt, mold, and all forms of release agents/curing agents. A light sanding with suitable abrasive material is recommended before application. Any resulting dust or loose particles must be removed before application.

Priming is not required for good quality non-porous concrete. However, if the concrete surface is porous or if there is any doubt about the quality of the concrete surface, use Vetoprime Décor

Apply one coat of Vetoprime Décor for both exterior and interior applications and allow it to completely dry before proceeding.

Stir well before use with a flat paddle to achieve a homogeneous consistency. Stir occasionally during use. Additives are not permitted. Close the container when not in use.

Apply and level Vetotouch Décor HB using a roller, brush, or spray gun during the same operation to achieve the minimum obtainable thickness consistent with uniform coverage.

Remove Vetotouch Décor HB from tools, equipment, and mixers with clean water before the initial set. Cured material can only be removed mechanically.

DOWNLOADS

Please login to download

EXPLORE MORE PRODUCTS

Vetotouch Décor FB

Ready-to-use textured decorative coating.

Wall & Facade

Vetotouch Décor MB

Ready-to-use textured decorative coating.

Wall & Facade

Vetotouch Textura - AE

Cementitious polymer modified decorative finish coat applied at thicknesses from 5 to 20mm.

Wall & Facade