ڤيتوبرايم اي بي 490

Vetoprime EP490 must be applied to a sound, clean and dry surface to achieve maximum bond strength between substrate and coating/repair products.

It should be at least 28 days old, and the relative humidity of the concrete is 75% or below. Laitance deposits on new concrete are best removed by light grit blasting, mechanical scrabbling, or grinding. 

Where heavy contamination by oil and grease has occurred or existing coatings are present, remove all contaminations.

Mix Vetoprime EP490 as supplied. Add the entire content of the hardener container to the base container and mix thoroughly for about 2 minutes. Once mixed, apply Vetoprime EP490 immediately in a thin continuous film using stiff brushes or rollers. Avoid over-application and puddles.

Allow Vetoprime EP490 to become tack-free before applying the epoxy coating (unless otherwise specified) but well within the open time specified for the given temperature. 

The hotter the substrate, the more quickly the primer will become dry.

Clean all tools and equipment immediately after use with Vetonit Solvent XX400.