Vetorel XT420 is supplied in containers ready to use at the site without a need to premix operation. Apply Vetorel XT420 by brush, roller, or spraying machine.
Apply Vetorel XT420 on plywood or steel shutter before the first casting. After every use of form-work, the shutter should be re-coated lightly with Vetorel XT420.
Do not over-apply Vetorel XT420 on the form-work. Excessive material should be allowed to drain before using the form-work.
Apply the product with a brush or preferably with a sprayer. It is advisable to apply Vetorel XT420 at least two hours before using the shutter for best results.
Consult Saveto technical department for any additional information.