ڤيتوبرايم آى سي

New Surfaces: 

All concrete, plaster, and masonry surfaces should be fully cured minimum 28 days prior to commencing of paint application. In general, all surfaces must be dry and oil-free, grease, dirt, efflorescence, and any loose material prior to application of Vetoprime AC.

Old Surfaces:

 All surfaces should be sound, clean, dry, and free from loose material, chalking, dirt, oil, grease, fungus, and mold.

Apply one coat of Vetoprime AC by brush, roller, air spray, and airless spray.

Allow Vetoprime AC to dry for at least one day before commissioning. At higher temperature 30 °C dry for one day. At lower temperature below 12 °C dry for 3 days.

Immediately after the application, clean all tools and equipment with tap water. Hardened material can be removed by mechanical means.

Vetoprime AC should not be applied at ambient temperatures below 5 °C. 

Do not apply the next coat unless the previous one is fully dry. Minimum recoating interval time should be followed. Do not apply on wet and moistened surfaces until completely dry. 

For further information contact our technical team.