تجاوز إلى المحتوى الرئيسي
Submitted by webmaster on 10 June 2024

ڤيتوبرايم سيبي 436

مثبط للتآكل.

Vetoprime CP436 is a two-component, polymer-modified, cementitious primer designed to enhance the bond between the concrete-repair range of repair mortars and existing reinforced steel. Vetoprime CP436 is also designed to protect the steel reinforcement by providing a highly alkaline passivating layer around the reinforcement and migrating corrosion inhibitor technology, which minimizes further corrosion to surrounding steel reinforcement.

الاستخدامات

  • Ideally designed as corrosion protection for steel reinforcement in the concrete repair systems.
  • For steel reinforcement accepting cementitious repair or concrete.

المزايا

  • Two component, easy to use.
  • High bond strength to concrete and steel.
  • Good physical properties and mechanical strength.
  • Polymer modified system with low VOC.
  • Protection of steel through Migrating Corrosion.
  • Inhibitor technology.
  • Good resistance to water and chloride penetration.
  • Safe and environment friendly.

تعليمات الاستخدام

It is essential to apply Vetoprime CP436 to a sound, clean, and dry surface to achieve maximum bond strength between substrate and coating/repair products.

All rust and scale should be removed from any exposed steel reinforcement by grit blasting techniques or equivalent approved methods until the steel is in a bright condition.

Mix Vetoprime CP436 by slowly adding the powder component to the liquid component. Mix thoroughly for about 2 minutes until a smooth and even consistency is achieved.

Apply two coats of Vetoprime CP436 in a 1 mm thickness approximately) using a brush. Allow each coat to reach the initial setting before the application of the second one.

Clean all tools & equipment with water immediately after use.

تحميل

استكشف المزيد من المنتجات

بوند اللياسة

مادة ربط وخلط للياسة والرندر

ڤيتونيت بوند بيور

عامل ربط ومادة خلط متعددة الاستخدامات

ڤيتونيت بوند ٢

مادة ربط وخلط خفيفة اللزوجة متعددة الاستخدامات