Submitted by webmaster on 6 June 2024

ڤيتوبوند آىبي 432

معدل إسمنتي وعميل ربط من البوليمر الأكريليكي.

Vetobond AB432 is an acrylic, polymer-based bonding agent and cement modifier designed to be used as a bonding aid, curing agent, and to gauge liquid for cementitious systems. The product is resistant to hydrolysis and can therefore be used for external applications. Vetobond AB432 is a milky liquid that first turns purple when applied on concrete then becomes clear once it dries. It can be applied directly from the bottle or pail onto concrete substrates using a brush, roller, or spray

الاستخدامات

  • Enhancement of renders, floor toppings, and plasters 
  • As a primer for bonding cementitious repair materials (Vetorep range). 
  • As a primer for renders and plasters (on fair faced concrete and gypsum boards). 
  • As a curing membrane (ready to receive further cementitious renders by re-priming).

المزايا

  • Adhesive bond to concrete will always exceed the tensile strength of the host concrete. 
  • Suitable for use on damp and dry concrete. 
  • Environmentally friendly, water-based, odorless, and non-flammable. 
  • Resistant to hydrolysis (can be used externally and internally). 
  • High mechanical properties (allows thin section applications). 
  • Excellent bond to concrete, masonry, stonework, plaster, and cement boards. 
  • Cost effective 
  • Suitable for the conditions of the MENA region.

تعليمات الاستخدام

Clean all surfaces and remove any dust, unsound material, plaster, oil, paint, grease, corrosion deposits, or algae. Roughen the surfaces, and remove laitance and expose aggregates by light scabbling or grit-blasting.

Expose corroded steel fully in the repair area & remove all loose scale and corrosion deposits. Clean the steel to a bright condition (pay extra attention to the back of the exposed steel bars). Grit-blasting is recommended for this process.

Thoroughly soak the substrate with clean water (and remove any excess) before working. Scrub Vetobond AB432 into the substrate. Avoid puddling and remove any excess.

Apply the repair mortar or topping while the primer is still tacky.

 

A suitable mix design for a patching repair mortar or render:  
OPC 50 Kg 
Sharp Sand # 60 150 Kg 
Vetobond AB432 10 Kg 
Water Enough to give workable consistency 

Cure the repair mortar or topping using Vetobond AB432 to prevent rapid loss of water. In severe drying conditions, additional curing methods may be necessary. Protect uncured mortar from frost and rain.

Remove Vetobond AB432 from tools, equipment, and mixers with clean water immediately after use. Cured material can only be removed mechanically.

تحميل

استكشف المزيد من المنتجات

بوند اللياسة

مادة ربط وخلط للياسة والرندر

المواد الرابطة وطبقات الأساس

ڤيتونيت بوند بيور

عامل ربط ومادة خلط متعددة الاستخدامات

المواد الرابطة وطبقات الأساس

ڤيتونيت بوند ٢

مادة ربط وخلط خفيفة اللزوجة متعددة الاستخدامات

المواد الرابطة وطبقات الأساس