تجاوز إلى المحتوى الرئيسي
Submitted by webmaster on 5 June 2024

ڤيتوست سي آى 542

غراء أسمنتي مضاد للميكروبات (C1 T).

Vetoset CA542 is a cement-based thick-bed tile adhesive that works with most types of tiles. The product is composed of a blend of cement, carefully selected aggregates, special additives, and polymers that provide Vetoset CA542 with its unique properties. The product is suitable for internal and external use and contains special biocides that prevent bacterially and algae growth.

الاستخدامات

  • For use in Hygienic areas such as hospitals, clinics, and industrial kitchens. 
  • Laying most tiles types, including marble, granite, natural stone, glass mosaic, and porcelain. 
  • Tile over tile applications & with heated screeds.

المزايا

  • Easy to apply a single component. 
  • Used internally and externally. 
  • High bond strength to a variety of tiles. 
  • Antimicrobial, does not support the growth of microbes, algae, or fungi. 
  • Superior workability 
  • Water & weather resistance. 
  • Suitable for horizontal as well as vertical surfaces.

تعليمات الاستخدام

The substrate should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, or any other substance that might impair bond quality with the substrate. 

Concrete, hollow blocks, and cement-based substrates must be sufficiently cured and irrigated by water 1 hour before application.

Add to the mixing container 7-8.75 liters of water for each 25kg bag of Vetoset CA542. Add the powder to the water and mix for 3-4 minutes using a lowspeed electric drill fitted with a suitable paddle until achieving a uniform, lump-free consistency. Allow the mixed material to stand for about 10 minutes and remix briefly without adding further water.

Apply a thin layer of the adhesive onto the substrate using the flat edge of the trowel. Comb the adhesive with a suitable notched trowel horizontally to achieve a 2 - 5 mm bed thickness. Place the tiles with firm pressure to ensure proper contact with the adhesive. 

It is always better to work in a manageable area tiled within the adhesive's open time. Leave the tiled surfaces for 24 hours before grouting.

Clean tools and equipment with water immediately after use. Remove the hardened material using mechanical means.

تحميل

استكشف المزيد من المنتجات

غراء بلاط السيراميك

غراء إسمنتى مقاوم للإنزلاق

غراء المسابح

غراء تبليط مقاوم للمياه معدَّل بالبوليمير لتبليط المسابح والنوافير وخزانات المياه

ترويبة مسابح

ترويبة مقاومة للمياه لملء فواصل بلاط المسابح