تجاوز إلى المحتوى الرئيسي
Submitted by webmaster on 19 مايو 2024

ڤيتوثيرم بلاستر

لياسة أسمنتية متطورة عازلة للحرارة .

Vetotherm Plaster is a blend of OPC, silica sand, and graded lightweight aggregates plus functional additives for enhancing Workability and adhesion. Vetotherm Plaster is applied on all surfaces after the proper preparation of the surface. The product provides thermal insulation for building wall sections relying on advanced material technologies.

الاستخدامات

  • Thermal insulation of residential and non-residential concrete buildings.
  • Save energy consumption related to heating and cooling.
  • Internally or externally in wet & dry conditions onto block walls & rough surfaces.

المزايا

  • Excellent thermal insulation properties.
  • Fast mixing application using a spray machine.
  • It contains a special additive that reduces friction and prolongs the lifespan of the equipment.
  • Factory-controlled pre-blend ensures consistently high quality.
  • Requires only the addition of water on-site at the time of usage.
  • Uniform color/mass.
  • Improved workability & curing.
  • Easy application with uniform workflow enables high productivity & superior finishing.
  • Strong adhesion on a variety of substrates.
  • Internal & external applications.
  • Shrinkage control reduces surface cracks.
  • Suitable for humid & dry conditions.

تعليمات الاستخدام

The substrate should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc.
Before Vetotherm Plaster, wet the entire surface with clean potable water; the surface should look damp at the time of the Vetotherm Plaster application.
For smooth concrete surfaces, a spatter dash should be applied before the application of Vetotherm plaster.

Add to the mixing container 6 - 7.4 liters of water for each 20 Kg bag of Vetotherm Plaster or 900 - 1300 lit/hr for the plastering machine application. Add the powder to the water and mix with a mechanical plaster mixer or low-speed electric drill fitted with a suitable paddle until achieving a uniform, lump-free consistency.
Manual mixing is allowed for small batch quantities. Mix for approximately 1 - 2 minutes until achieving a homogeneous mix.

Apply Vetotherm Plaster in a single or two coats manual or machine application to achieve the desired thickness of 25- 100 mm.
Apply the mixed material using a spray machine or hawk & trowel technique. Rod or screed to uniform thickness, not exceeding 25 mm for a single coat or 25 mm for each coat for multiple layers. Pres the first layer hard against the surface.
For the second layer, allow the first layer to set (60 - 120 min depending on weather) partially. Apply the second layer as described above.
Water spray the surface if the second layer is carried out the next day.
To ensure proper water demand for this job, it is a best practice is to do the application on a small area with the desired thickness to check the adhesion to substrate and the cohesiveness of the material.

The best way to cure Vetotherm Plaster is by spraying water evenly on the applied material surfaces every 12 hrs for a minimum of 3 days. During hot & dry conditions, allow curing for a minimum of 5 days; It will help obtain high mechanical strengths.

Clean all tools immediately after finishing with water. Clean hardened materials mechanically.

تحميل

استكشف المزيد من المنتجات

كوول مورتر

مونة بناء أسمنتي عازل للحرارة.

ڤيتوثيرم فليكس

لاصق أسمنتي وطبقة أساس لنظام العزل الخارجي EIFS/ETICS.

كوول بلاستر

لياسة أسمنتية عازلة للحرارة.