تجاوز إلى المحتوى الرئيسي
Submitted by webmaster on 5 June 2024

ڤيتوتتش يوروبا

طبقة تشطيب إسمنتية ملونة 1-5 مم

Vetotouch Europa is a cement-based decorative finish composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar.

الاستخدامات

  • External and internal building facades. 
  • As a finish coat for EIFS / ETICS systems. 
  • On plaster surfaces and concrete surfaces. 
  • On overhead surfaces. 
  • Decorative European effects: Mexican, Spanish, Antique, and Textured. 
  • It can be applied to 5 mm in multiple layers (1 - 2 mm per layers).

المزايا

  • Factory controlled pre-blend ensures consistently high quality. 
  • Requires only the addition of water on-site at the time of usage. 
  • Uniform color / mass. 
  • Improved workability and curing. 
  • Easy application with uniform work flow enables high productivity and superior finishing. 
  • Strong adhesion on a variety of substrates. 
  • Internal and external applications. 
  • Weather-resistant. 
  • UV stable pigment provides resistance to fading and eliminates the need for additional paint. 
  • Suitable for humid and dry conditions.

تعليمات الاستخدام

The substrate should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc. 

Before the Vetotouch Europa application, wet the entire surfaces with clean potable water. The surface should look damp at the time of the Vetotouch Europa application.

Add to the mixing container 7.5 - 8.5 liters of water for each 25kg bag of Vetotouch Europa. Add the powder to the water and mix with a mechanical plaster mixer or low-speed heavy-duty electric drill fitted with a suitable paddle until achieving a uniform, lump-free consistency. Leave the mixed material to stand for 10min and briefly remix without adding water. 

For small batch quantities, mix the material manually for approx. 1 - 2 min or when achieving homogeneous mix. 

A manual application is considered (not by spray machines), optionally, adding 0.5 to 1.0 liter of Vetobond AB432 to the mixing water and adjusting the water requirement accordingly for each 25kg bag. Follow the same mixing procedure as described above. 

Use the mixed material within 60 - 120 minutes. Do not add water once the mixed mortar starts to harden.

Apply Vetotouch Europa in a single or multiple coats on smooth (plastered) surfaces by trowel application to achieve the desired thickness of 1-5mm.

It is vital to cure Vetotouch Europa surface with clean potable water 2 times a day for 3 days. During hot and dry conditions, extend the curing period for a minimum of 5-7 days. It will help to obtain high physical properties. An acrylic-based curing compound can be used. 

To protect the final color look, it is recommended to apply one coat of Saveto Vetoseal product range (contact the technical department for advice).

Clean tools with water before the mortar hardens. After the hardening, remove its residuals mechanically only.

تحميل

استكشف المزيد من المنتجات

ڤيتوتتش تكستشورا

طبقة تشطيب زخرفية أسمنتية معدلة بالبوليمر الأكريليكي

ڤيتوتتش مونوكوش

لياسة مسبقة الخلط مصبوغة

ڤيتوتتش مارمو

ملاط تشطيب زخرفي برقائق الرخام