تجاوز إلى المحتوى الرئيسي
Submitted by webmaster on 6 June 2024

ڤيتوتوب اكس تي 539

مقوي أرضيات بالرش الجاف قائم على الألماس

Vetotop XT539 is a cementitious floor dressing material composed of hydraulic binders, selected hard-wearing aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site. Vetotop XT539 is applied by the dry shake method to provide a hard-wearing top surface that bonds monolithically to the concrete flooring. It is ideal for all industrial areas subjected to heavy traffic, such as power stations, heavy industry, agricultural buildings, distillation plants, laboratories, abattoirs, warehouse floors, loading bays, and workshops.

الاستخدامات

  • Enhancing concrete floor surface properties. 
  • Provide an abrasion-resistant concrete floor surface. 
  • Fiber suppressant of concrete floors. 
  • Enhance the durability of concrete floors. 
  • Dust-proofing of concrete slabs.

المزايا

  • Premixed, ready to use, offering factory-controlled quality assurance. 
  • Ease of application. 
  • High abrasion and impact resistance. 
  • Bonds monolithically to fresh concrete. 
  • No-dusting surface. 
  • Nonoxidizing. 
  • Provides a hard, dense surface resistant to oils and petroleum-based products. 
  • Suitable for internal and external use.
  • Economic installation.

تعليمات الاستخدام

Sprinkle Vetotop XT539 along edges of bays (Approx. 100 mm strips) where expansion and contraction joints will be located first. Float into the surface using a wooden float. 

As soon as the concrete is firm enough to support the workman’s weight, apply the first shake of Vetotop XT539. Use up to 2/3 of the total shake mix in the first application. Treat areas adjacent to walls and columns first. Spread the material evenly by sprinkling at right angles in two passes close to floor level. Allow applied material to absorb moisture from the concrete surface. Uniform darker color will be apparent. 

Using a wooden float, float Vetotop XT539 into the concrete, ensuring material becomes an integral part of the surface. Follow second floating immediately after first floating. Spread the balance 1/3 of the material, follow promptly with second floating using wood or aluminum float or power float in case of large areas. A third power floating may follow for added compaction if required.

Vetotop XT539 is a cementitious product. Follow all norms and practices of casting and curing cementitious products, either covering the surface with water and polyethylene sheets or applying a curing compound. Immediately after removing the polyethylene sheet, sweep the floor to remove any dust or loose particles.

Clean tools with water promptly before material hardens. Hardened material can be mechanically removed.

تحميل

استكشف المزيد من المنتجات

ڤيتوتوب يو سي 363

غشاء عزل مائي بولي يوريثان لأرضيات المرور

ڤيتوتوب اي سي 498

طلاء إيبوكسي خالٍ من المذيبات

ڤيتوتوب سي ال 530

طبقة تسوية ذاتية أسمنتية 2-10 مم