Primers and Ancillary
Vetonit Solvent XX400

Resin cleaning & thinning solvent

Clean equipment and tools after use or mixing of epoxy-based resins.
Thinning specific epoxy products.
Fast Download
Technical Information
Product Description

Vetonit Solvent XX400 is a specially developed solvent blend for epoxy resins commonly found in all Saveto epoxy products.

Packaging & Coverage

Vetonit Solvent XX400 is supplied in 5 and 20 Liter pails.

Shelf Life & Storage

The original sealed container of Vetonit Solvent XX400 has a shelf life of 12 months, provided it is stored clear of ground in a dry, well ventilated, and shaded place below 35ºC.

Pale Liquid
Application Information
Instructions for use


It is best to pour some Vetonit Solvent XX400 into a container and clean the implements within this container for cleaning tools.

For cleaning substrates, the solvent can be poured directly or applied by cloth or paper.

For the thinning application of Saveto products, please refer to the product datasheet, and consider the thinning ratio to the original material, or refer to the local Saveto office for further information.

For other products, strictly follow the product thinning ratios mentioned in the technical datasheet.

Additional Information
Health & Sefety

Vetonit Solvent XX400 is an industrial-grade solvent that should not contact skin and eyes or be swallowed. Avoid inhalation of vapor and spray. Use only in well-ventilated areas. In case of insufficient ventilation, wear suitable respiratory protection. Wear suitable protective clothing, gloves, and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical attention immediately - do not induce vomiting.

No smoking or naked flames.

Refer to the product Material Safety Data Sheet for further information.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give is accurate and correct. It cannot accept any liability, either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not following any advice, specification, recommendation, or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year. Our technical data sheets are continuously updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Ready Mix Bond
Multi-purpose bonding agent & admixture


Multi-purpose bonding agent & admixture

Saveto Bond 2
Multipurpose low viscosity bonding agent & admixture


Multipurpose low viscosity bonding agent & admixture

Vetobond PB436
Polymeric soil stabilizer


Polymeric soil stabilizer

Vetobond PB434
Polymeric bonding agent, waterproof mix enhancer & primer


Polymeric bonding agent, waterproof mix enhancer & primer

Vetobond PB433
Versatile resin adhesive, cement modifier, bonding agent & sealer


Versatile resin adhesive, cement modifier, bonding agent & sealer

view more
Featured Product
Vetonit Render

Water Resistant Patch & Repair Premixed Render

Internal & external plaster on block walls and rough surfaces.
Applied on both vertical and overhead surfaces.
On concrete surfaces that are smooth and also precast concrete surfaces without a scratch coat applied first.
Plastering to a thickness of 10mm in a single application.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718