Tiling Systems
Vetoset CA545

Polymer modified two-component cementitious deformable tile adhesive for all tile types (C2TE S2)

 

Uses
Highly flexible tile adhesive for demanding applications.
Laying most tiles types, including marble, granite, natural stone, glass mosaic, and porcelain.
Laying of large format heavy tiles in internal and external applications.
Tile over tile applications & with heated screeds.
Fast Download
Catalogues
Saveto Tile Adhesives & Grouts Professional Product Range Brochure
download (*.pdf 2.34Mb)
Technical Information
Product Description

Vetoset CA545 is a two-component cement-based professional grade highly deformable tile adhesive that works with most tiles and flexible substrates. The product is composed of a blend of cement, carefully selected aggregates, special additives, and polymers that provide Vetoset CA545 with its unique properties. The product is suitable for internal and external use, including submerged conditions such as swimming pools and water reservoirs.

 

Advantages
  • Easy to apply dual component.

  • Highly deformable.

  • High water resistance.

  • Suitable for tiling on tile applications.

  • Withstands vibrations and thermal variations.

  • Used internally and externally.

  • High bond strength.

  • Suitable for use with underfloor heating systems.

  • Immersed and wet areas tiling.

COMPLIANCE STANDARD
  • BS EN 12004:2010 as C2TE S2
  • SASO ISO13007-1 as C2TE S2
  • TCNA recommendations for use with large tile formats.
Packaging & Coverage

Vetoset CA545 is supplied in 27kg Kits (20 Kg bag and 7 Liter container).

Yield: 14 Liters

Stated consumption data are for general guidance. Actual consumption depends on the nature of substrate, method of application, and wastages.

Shelf Life & Storage

Original sealed bag & container of Vetoset CA545 have a shelf life of 12 months provided it is stored clear of ground in a dry, shaded place below 35ºC.

Colors
Grey or White Powder
Application Information
Instructions for use

Mixing

Add to the mixing container the 7 liters liquid part of Vetoset CA545 to 20Kg bag of Vetoset CA545. Add the powder to the liquid and mix with a mechanical mixer or low-speed heavy-duty electric drill fitted with a suitable paddle for 3-4 minutes until achieving a uniform, lump-free consistency.

Application

Apply a thin layer of the adhesive onto the substrate using the flat edge of the trowel. Comb the adhesive with a suitable notched trowel to achieve a bed thickness of 2 - 5 mm. Place the tiles with firm pressure to ensure proper contact with the adhesive.

It is always better to work in a manageable area that can be tiled within the adhesive's open time. Leave the tiled surfaces for 24 hours before grouting.

Note: The adhesive bed's thickness is directly proportional to the size and thickness of the tile.

Cleaning

Clean tools and equipment with water immediately after use. Remove the hardened material using mechanical means.

Surface Preparation

The substrate should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, or any other substance that might impair the quality of bond with the substrate.

Concrete, hollow blocks, and cement-based substrates must be sufficiently cured and irrigated by water 1 hour before application. Gypsum boards, plasterboards, anhydrite screeds must be sufficiently dry and free from dust.

Additional Information
Health & Sefety

Vetoset CA545 is highly alkaline; therefore, avoid direct contact with eyes or skin. It is recommended to use protective gloves and goggles during application. Any skin contact should be washed with soap and water. In case of eye irritation, immediately wash with a copious amount of clean cold water. Seek medical advice.

Vetoset CA545 is non-flammable.

For further information, please refer to the material safety data sheet.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products because it has no direct or continuous control over where or how its products are applied, whether or not following any advice, specification, recommendation, or information given by us. Saveto has the right to change any of the technical datasheets' specifications upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year. Our technical data sheets are continuously updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Ceramic Tile Fix

Weather-resistant cementitious adhesive for ceramic tiles

Pool FIX

Polymer modified water resistant adhesive for fixing swimming pools, fountains & water tanks tiles

 

Pool Grout

Water-resistant grout for swimming pool tile joints

Porcelain Tile Fix

Polymer modified weather resistant adhesive for porcelain tiles.

Premium Project Fix

High quality ceramic tile adhesive for projects.

 

view more
Featured Product
Vetotop CX534

Premixed 20 to 100 mm thick conventional cementitious mortar

Uses
Cost-effective cavity filling in non-structural areas.
Non-structural backing mortar.
Filling around underfloor heating installations and mechanical fittings.
As a bedding mortar for granite and marble.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com