Flooring Systems
Vetograin Range

Hard-wearing silica aggregates to be used in conjunction of Saveto anti-slip flooring system

Uses
Workshops, garages, power stations, and loading bays.
Heavy-duty factories, car park decks, and aircraft hangers.
Any flooring where impact resistance is of importance.
Fast Download
Technical Information
Product Description

Vetograin is a specially formulated anti-slip aggregate designed to elevate the foot or wheel on a damp or wet surface, permitting the water to escape instead of causing the foot or wheel to hydroplane. Composed of silica sand, which is very hard, and angular, and blocky in shape, this aggregate provides long-term durability and excellent slip-resistant features.

Advantages
  • Pre-packed ready for immediate site use.
  • Range to suit a wide range of applications.
  • Ready to use packing.
  • Increase the slip resistance of industrial flooring and coatings.
  • Provides a mechanical key for overlay systems.
  • Increase the impact of Industrial flooring & coating.
Packaging & Coverage

Vetograin Products are supplied in 25kg Bags.

Vetograin Range

Grain Size

Floor Texture

Vetograin 0.45

0.10-0.45mm

Extra Fine

Vetograin 0.60

0.30-0.60 mm

Fine

Vetograin 0.80

0.425-0.80 mm

Medium

Vetograin 2.00

1.00-2.00 mm

Coarse

Shelf Life & Storage

The original sealed bag of Vetograin has a shelf life of 12 months, provided it is stored clear of ground in a dry and shaded place below 35ºC.

Application Information
Instructions for use

Design Criteria

Slip-resistant aggregates can be obtained in a range of sizes from fine through to coarse. The choice of aggregate can depend on the type of coating, and the degree of slip resistance required. Finer grades of aggregate are conventionally used in thinner coatings, where coarser grades tend to ball up. Coarser grades are more suitable for thicker coatings, where the finer grades would get lost in the coating hence reducing their effectiveness. Coarser grades are generally more suitable for achieving high levels of slip resistance.

Application

The Selected Vetograin aggregates are broadcasted onto the first rolled coat of Saveto resin flooring whilst it is still wet.  Sufficient Vetograin anti-slip aggregates should be applied to cover the surface completely.

When the first coat has dried, the excess aggregate can be removed by brushing or vacuum off the substrate, and provided it is still clean and dry can be re-used.

Vetograin should be applied vertically into the resinous flooring to avoid damaging the film continuity of the flooring.

Additional Information
Health & Sefety

Vetograin is non-flammable and non-hazardous.

Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give is accurate and correct. It cannot accept any liability, either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not following any advice, specification, recommendation, or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year. Our technical data sheets are continuously updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Vetodeck UD
Polyurethane based heavy-duty, waterproof, and UV resistant car park decking system

">

Polyurethane based heavy-duty, waterproof, and UV resistant car park decking system

Vetotop CL530
Premixed 2 to 10 mm thick cementitious self-leveling underlayment

">

Premixed 2 to 10 mm thick cementitious self-leveling underlayment

Vetotop CS535

Premixed 10 to 30 mm thick cementitious screed

Vetotop CS536

Premixed 30 to 100 mm thick cementitious screed

Vetotop EC493
Solvent-based high performance, self-priming, thin epoxy topping

">

Solvent-based high performance, self-priming, thin epoxy topping

view more
Featured Product
Vetoproof CM745
Elastomeric crack-bridging cementitious waterproof membrane

">

Elastomeric crack-bridging cementitious waterproof membrane

Uses
Waterproof lining for water tanks, dams, canals, etc.
Wet-areas waterproofing while receiving tile adhesives.
Protecting concrete and masonry structures against ingress of chloride ions and carbonation
Negative hydrostatic pressure resistance
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com