Vetonit PAB100

Saveto plaster accessories  - plaster architrave beads


Architrave Feature Bead is used to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features.
It can also be used to act as a neat divide between differing wall finishes.
Fast Download
Technical Data Sheet
download (*.pdf 0.64Mb)
Technical Information
Product Description

Vetonit PAB100  is a pre-galvanized steel protector architrave beads designed to act as a plaster stop profile whilst creating a shadow like recess around door frames, ceiling and varying wall finishes.

Vetonit PAB100 will increase the speed of installation and finishing process dramatically.       

  • Easy to apply.
  • High impact resistance.
  • Reduces the time taken in plaster finishing process.

ACI: 524R-08 (Building Code Requirements for Masonry Structures).


Packaging & Coverage

Vetonit PAB100

Width (mm)

Length (m) 


Vetonit PAB133




Vetonit PAB163




Vetonit PAB193




Application Information
Instructions for use


Fix Vetonit PAB100 by using Premix Plaster S, Vetonit Render, or any suitable mechanical fixing at a maximum center spaces of 600mm.

Vetonit PAB100 may be wire tied to the face of metal lathing backgrounds. Use tinsnips or shears to cut angle beads to the desired size.

When jointing architrave  beads use a dowel inserted in the nose to ensure continuity and alignment.

To get a sharp neat corner finish, avoid damaging the  beads when troweling plaster or render.

Additional Information
Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Vetoflex PBR

Closed cell polyethylene backing rod

Vetonit PAB500

Saveto plaster accessories - angle beads


Vetonit PBL

Saveto block reinforcement access-ories ladder type


Vetonit PCJ

Saveto plaster accessories - plaster control joint 


Vetonit PCL

Saveto plaster accessories - plaster coil lath 


view more
Featured Product
Vetogrout GA516

Plasticized expanding grout admixture

Admixture for cementitious grouts where a reduced water/cement ratio and positive expansion are required.
Industrial applications where chemical resistance and rapid strength development are required.
Applications include bed grouting, duct grouting, non-shrink infilling, and jointing.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718