Vetonit PBL

Saveto block reinforcement access-ories ladder type


As vertical bars to reinforce masonry block works.
Reinforces block walls against wind effect.
Withstand the loading of material against the wall.
Fast Download
Technical Data Sheet
download (*.pdf 0.34Mb)
Technical Information
Product Description

Vetonit PBL ladder is a galvanized steel cross rods manufactured with mason productivity and proper wall construction in mind. Cross rods are spaced, so block cells are not obstructed, allowing easy placement of vertical rebars. Vetonit PBL increases the performance of masonry walls under various stresses.


  • Easy to apply.
  • Highly effective in reducing cracks that can arise from thermal stresses.
  • Enhances resistance to water penetration, as cracks are controlled.
  • Increase lateral flexural strength.
  • Increase elasticity.
  • Increase performance of masonry walls under various stresses.
  • Fabricated on conformance with ASCE/ACI 520 Building code requirements for masonry structures and ASTM A 951 (Standard specification of masonry joint reinforcement).
  • ASTM A951 
  • ACI / ASCE 530 (Building Code Requirements for Masonry Structures).
Packaging & Coverage

Vetonit PBL

Width (mm) 

Length (m) 

Vetonit PBL053



Vetonit PBL103



Vetonit PBL153



Vetonit PBL203



Application Information
Additional Information
Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products because it has no direct or continuous control over where or how its products are applied, whether or not following any advice, specification, recommendation, or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year. In addition, our technical data sheets are continuously updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Vetoflex PBR

Closed-cell polyethylene backing rod

Vetonit PAB100

Saveto plaster accessories  - plaster architrave beads

Vetonit PAB500

Saveto plaster accessories - angle beads

Vetonit PCJ

Saveto plaster accessories - plaster control joint 


Vetonit PCL

Saveto plaster accessories - plaster coil lath 


view more
Featured Product
Vetotop EL492
Self smoothening epoxy-based floor topping from 0.8 to 2 mm thickness


Self smoothening epoxy-based floor topping from 0.8 to 2 mm thickness

Industrial kitchens and food processing plants.
Vehicle factories and car parks.
Clean rooms and laboratories.
Plant rooms & pathways.
Any flooring where impact resistance is required.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718