Accessories
Vetonit PCJ

Saveto plaster accessories - plaster control joint 

 

Uses
Designed to deal with normal initial stucco shrinkage during the hydration and curing stage of cement stucco coats.
Controls plaster thermal expansion and contraction.
For walls and ceilings and joints.
Fast Download
Technical Data Sheet
download (*.pdf 0.22Mb)
Technical Information
Product Description

Vetonit PCJ is a pre-galvanized steel control joint bead designed to minimize plaster cracking and to allow movement in the plaster. Vetonit PCJ overcomes movement tolerances in plaster expansion, controls joints, and offers positive locking of the stucco at the edge of the joint. In addition, Vetonit PCJ deals with the normal initial plaster shrinkage during curing and minor thermal expansion and contraction.

 

Advantages
  • Easy to apply.
  • High impact resistance.
  • Overcomes movement tolerances in the plaster expansion.
COMPLIANCE STANDARD

ACI: 524R-08 (Building Code Requirements for Masonry Structures).

Packaging & Coverage

Vetonit PCJ

Wing (mm)

Length (m) 

QTY/Box

Vetonit PCJ103

10

3

50

Vetonit PCJ133

13

3

50

Vetonit PCJ163

16

3

50

Vetonit PCJ193

19

3

50

Application Information
Instructions for use

Application

Fix Vetonit PCJ using Premix Plaster S, Vetonit Render, or any suitable mechanical fixing at a maximum center space of 600mm.

Vetonit PCJ may be wire tied to the face of metal lathing backgrounds. Use tin snips or shears to cut angle beads to the desired size.

When jointing controls joint beads, use a dowel inserted in the nose to ensure continuity and alignment.

To get a sharp, neat corner finish, avoid damaging the beads when troweling plaster or render.

Additional Information
Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products because it has no direct or continuous control over where or how its products are applied, whether or not following any advice, specification, recommendation, or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year. In addition, our technical data sheets are continuously updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Vetoflex PBR

Closed-cell polyethylene backing rod

Vetonit PAB100

Saveto plaster accessories  - plaster architrave beads

Vetonit PAB500

Saveto plaster accessories - angle beads

Vetonit PBL

Saveto block reinforcement access-ories ladder type

 

Vetonit PCL

Saveto plaster accessories - plaster coil lath 

 

view more
Featured Product
Vetofill CG550

Professional grade cementitious non sanded tile grout

 

Uses
Filling tile joints virtually all types of tiles between 2mm up to 10 mm gaps.
Commercial and residential buildings such as shopping malls, office buildings, palaces, and mansions.
Wet areas such as kitchens, bathrooms, and swimming pools.
Filling glass block joints.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
Sales
800 124 9009
Fax: (+966 11) 265 0718
Email: sales@saveto.com