Vetonit PCM

Saveto plaster accessories - plaster corner mesh lath 


At inside corner joints with dissimilar material base.
Fast Download
Technical Data Sheet
download (*.pdf 0.64Mb)
Technical Information
Product Description

Vetonit PCM is a galvanized steel jointless mesh bent lengthwise in the center used inside corner joints with a dis-similar material base. Vetonit PCM is designed to prevent cracking in the plaster.


  • Easy to apply.
  • High impact resistance.
  • Overcomes movement tolerances in plaster expansion.

ACI: 524R-08 (Building Code Requirements for Masonry Structures).


Packaging & Coverage

Vetonit PCM

Wings Width (mm)

Length (m) 


Vetonit PCM503




Vetonit PCM703




Application Information
Instructions for use


Fix Vetonit PCM corner mesh lath by using Premix Plaster S, Vetonit Render, or any suitable mechanical fixing at a maximum center space of 600mm.

Vetonit PCM may be wire tied to the face of metal lathing backgrounds. Use tin snips or shears to cut angle beads to the desired size.

When jointing controls joint beads, use a dowel inserted in the nose to ensure continuity and alignment.

To get a sharp, neat corner finish, avoid damaging the beads when troweling plaster or render.

Additional Information
Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products because it has no direct or continuous control over where or how its products are applied, whether or not following any advice, specification, recommendation, or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year. In addition, our technical data sheets are continuously updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Vetoflex PBR

Closed-cell polyethylene backing rod

Vetonit PAB100

Saveto plaster accessories  - plaster architrave beads

Vetonit PAB500

Saveto plaster accessories - angle beads

Vetonit PBL

Saveto block reinforcement access-ories ladder type


Vetonit PCJ

Saveto plaster accessories - plaster control joint 


view more
Featured Product
Vetogrout EG340
Waterproof dynamic load-bearing epoxy grout


Waterproof dynamic load-bearing epoxy grout

Grouting & anchoring bridge bearings and pile caps.
Industrial applications where chemical resistance and rapid strength development are required.
Under-plate grouting & heavy machine beds.
Dynamic and cyclic load situations grouting.
Demanding grout thicknesses up to 200mm.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718