Vetonit PSB

Saveto plaster accessories - plaster stop beads 

Stop Beads is an all-purpose square nose plaster stop (casing bead).
As a plaster stop for finishes and reinforces plaster edges, screed ground.
As exposed trim around doors and windows, as well a base screed.
Fast Download
Technical Data Sheet
download (*.pdf 0.22Mb)
Technical Information
Product Description

Vetonit PSB is a pre-galvanized protector steel stop beads profile that provides the ideal answer to finishing the edge of plaster /render work. The straight edge of the profile ensures an accurate finish line whilst protecting the plaster where it is most vulnerable.

  • Easy to apply.
  • High impact resistance.
  • Reduces the time taken in finishing the plastering process.

ACI: 524R-08 (Building Code Requirements for Masonry Structures).

Packaging & Coverage

Vetonit PSB

Wing (mm)

Length (m) 


Vetonit PSB103




Vetonit PSB133




Vetonit PSB163




Vetonit PSB193




Application Information
Instructions for use


Fix Vetonit PSB using Premix Plaster S, Vetonit Render, or any suitable mechanical fixing at a maximum center space of 600mm.

Vetonit PSB may be wire tied to the face of metal lathing backgrounds. Use tin snips or shears to cut angle beads to the desired size.

When jointing stop beads, use a dowel inserted in the nose to ensure continuity and alignment.

To get a sharp, neat corner finish, avoid damaging the beads when troweling plaster or render.

Additional Information
Important note

Saveto endeavors to ensure that any advice, recommendations, information it may give is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products because it has no direct or continuous control over where or how its products are applied, whether or not following any advice, specification, recommendation, or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.

Hard copies of TDSs are printed once or twice a year. In addition, our technical data sheets are continuously updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.

More Products from this section
Vetoflex PBR

Closed-cell polyethylene backing rod

Vetonit PAB100

Saveto plaster accessories  - plaster architrave beads

Vetonit PAB500

Saveto plaster accessories - angle beads

Vetonit PBL

Saveto block reinforcement access-ories ladder type


Vetonit PCJ

Saveto plaster accessories - plaster control joint 


view more
Featured Product
Vetotop CL531

Premixed 8 to 20mm thick polymer modified cementitious self-leveling underlayment

Leveling of concrete slabs before application of final floor coverings such as tiles and resinous systems.
As a substrate for vinyl tiles, parquet, carpet, and floor coverings that require super-flat substrates.
Contact us
Choose a country
Saudi Vetonit Co. Ltd. (SAVETO)
P.O. Box 52235 Riyadh 11563, KSA
Toll: (+966 11) 265 3334
Fax: (+966 11) 265 0936
800 124 9009
Fax: (+966 11) 265 0718