Resin cleaning & thinning solvent
Vetonit Solvent XX300 is a specially developed solvent blend for use with the resins commonly found in Saveto products and other construction chemicals. Vetonit Solvent XX300 is much more effective than common solvents such as Xylene, white spirit, heavy-naphtha.
Vetonit Solvent is supplied in 5 & 20 Liters container.
Actual consumption depends on the nature of the substrate, method of application, and wastage.
The original sealed container of Vetonit Solvent XX300 has a shelf life of 12 months, provided it is stored clear of ground in a dry well ventilated, and shaded place below 35ºC.
It is best to pour some Vetonit Solvent XX300 into a container and clean the implements within this container for cleaning tools.
For cleaning substrates, the solvent can be poured directly or applied by cloth or paper.
For the thinning application of Saveto products, please refer to the product datasheet, and consider the thinning ratio to the original material, or refer to the local Saveto office for further information.
For other products, strictly follow the product thinning ratios mentioned in the technical datasheet.
Vetonit Solvent XX300 is an industrial-grade solvent that should not contact skin and eyes or be swallowed. Avoid inhalation of vapor and spray. Use only in well-ventilated areas. In case of insufficient ventilation, wear suitable respiratory protection. Wear suitable protective clothing, gloves, and eye/face protection. In case of contact with eyes, rinse immediately with plenty of water, and seek medical advice. If swallowed, seek medical attention immediately - do not induce vomiting.
No smoking or naked flames.
Refer to the product Material Safety Data Sheet for further information.
Saveto endeavors to ensure that any advice, recommendations, information it may give is accurate and correct. It cannot accept any liability, either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not following any advice, specification, recommendation, or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.
Hard copies of TDSs are printed once or twice a year. Our technical data sheets are continuously updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.
Multi-purpose bonding agent & admixture
Multipurpose low viscosity bonding agent & admixture
Polymeric soil stabilizer
Polymeric bonding agent, waterproof mix enhancer & primer
Versatile resin adhesive, cement modifier, bonding agent & sealer
Vetotherm AFA , Vetotherm ACP, Vetotherm ABP, & Vetotherm AWP