Sprinkle Vetotop XT538 along edges of bays (Approx. 100 mm strips) where expansion and contraction joints will be located first. Float into the surface using a wooden float.
As soon as the concrete is firm enough to support the workman’s weight, apply the first shake of Vetotop XT538. Use up to 2/3 of the total shake mix in the first application. Treat areas adjacent to walls and columns first. Spread the material evenly by sprinkling at right angles in two passes close to floor level. Allow the applied material to absorb the moisture from the concrete surface. Uniform darker color will be apparent.
Using a wooden float, float Vetotop XT538 into the concrete, ensuring the material becomes an integral part of the surface. Follow the second floating immediately after the first floating. Spread the balance 1/3 of the material, follow promptly with the second floating using wood or aluminum float or power float in case of large areas. A third power floating may follow for added compaction if required.
