Vetotop EC495 is a two-component, high-performance, solvent-based, epoxy coating system that adheres perfectly to various substrates like concrete, metal, wood, stone, etc.
Once cured, the product has excellent abrasion and chemical resistance. Vetotop EC495 provides an attractive, hardwearing, and easily cleanable floor finish. When used on floors and walls, vetotop EC495 enhances the environment’s lighting due to its reflective properties.
The surface should be sound, clean, free from loose material, grease, laitance, dirt-curing compounds, etc.
Laitance and weak surface layers must be removed using mechanical methods such as grinding or blasting to provide a sound, well-profiled surface. All necessary repairs should be made before applying Vetptop EC495 by using epoxy mortar from the Vetorep ER range.
New concrete floors should be at least 28 days old, with a moisture content of less than 5% (Test the substrate for moisture conditions if you wish to apply earlier).
Stir the components of Vetotop EC495 individually before mixing them together. Pour the entire content of the hardener container into the base container, mix the materials thoroughly for at least 3 minutes. We recommend using a heavy-duty, slow speed, flameproof or air-driven drill fitted with a mixing paddle.
Apply the mixed Vetotop EC495 kit to the prepared surface using a brush or a roller made from lambswool. Ensure that the area is completely coated and that the ‘ponding’ of the material does not occur.
The applied coating can receive foot traffic in 24 hours. However, it should be allowed 7 days to achieve full cure in order to receive vehicular traffic (chemical resistance properties are reached then).
Remove Vetotop EC495 from tools and equipment with Vetonit Solvent XX400 immediately after use. Remove hardened material mechanically.
Premixed 8 to 20mm thick polymer modified cementitious self-leveling underlayment.