Submitted by webmaster on 19 May 2024

Porcelain Tile Fix

Polymer-modified, weather-resistant adhesive for porcelain tiles.

Porcelain Tile Fix Is a deformable cementitious adhesive with improved characteristics, slip resistance, and extended open time (as per ISO-13007-1 class C2 TE S1 description). It is composed of hydraulic binders, selected aggregates, and special additives. The product is supplied as a dry powder in pre-weighed bags ready to use on-site; requiring only the addition of clean water to produce an easily workable mortar. Porcelain Tile Fix is suitable for a dry-set fixing mortar, particularly for porcelain tiles. Porcelain Tile Fix is applied at a thickness of 3 - 10 mm, depending on the type of tiles and the quality of the substrate.

Uses

  • Specially designed for porcelain tiles.
  • Suitable for non-absorbent tiles, including large ones.
  • Tiling on smooth concrete surfaces, lightweight bricks, blocks, and plasterboards.
  • Tiling on cement and gypsum boards.
  • Tiling on wall surfaces plastered with Saveto’s products.
  • Suitable for dry & wet conditions.

Advantages

  • Factory-controlled pre-blend ensures consistently high quality.
  • Requires only the addition of water on-site at the time of use.
  • Easy tile installation that enables high productivity.
  • Superior workability.
  • Excellent slip resistance.
  • Excellent adhesion on a variety of tiles available in the local market.
  • Water & weather-resistant.
  • Suitable for internal & external applications.
  • Suitable for horizontal & vertical surfaces.

Usage Instructions

The surface should be sound, clean, and free from loose material, oil, grease, laitance, dirt, curing compound, etc.

Wet all surfaces (except gypsum boards) with clean water before applying Vetonit Porcelain Tile Fix. The surface should appear damp with no water pooling.

For the mortar adhesive preparation, pour 5-7 litres of water into a container then add the powder from the 20 Kg bag of Porcelain Tile Fix and mix using a low-speed electric drill fitted with a suitable paddle until a uniform, lump-free consistency is achieved. Allow the mixed material to stand for about 10 minutes and remix briefly without adding further water.

You can blend Vetonit Porcelain Tile Fix manually for small quantities, however, you must maintain the correct ratio of powder to water. Do not add water to the mixture once the mortar adhesive begins to harden.

Spread the mixed mortar adhesive using a notched trowel. Firmly press the mortar onto the surface that will be tiled then spread it to an area that can be tiled within 10 - 15 minutes. Press the tiles firmly over the mortar adhesive and immediately knock them into the desired position. Adjust the position of the tiles, if required, within the recommended adjustability time of 10 - 15 minutes after installation.

Leave installed tiles undisturbed for at least 48 hours. The mortar adhesive must not rise between the tile joints higher than half of the thickness of the tiles. It is recommended to use Vetonit Tile Grout to fill the joint gaps after 2 days of tile installation.

For further information regarding the suitable substrates and tiles on which this product can be safely applied, please contact Saveto’s technical department.

Clean tools and equipment with water immediately after use. Remove the hardened material using mechanical means.

DOWNLOADS

EXPLORE MORE PRODUCTS

Ceramic Tile Fix

Cementitious adhesive with slip resistance.

Tiling

Pool Fix

Cementitious Adhesive for Pools (C2 TE S1).

Tiling

Pool Grout

Cement Tile Grout for Pools.

Tiling