Pool Grout
Water-resistant grout for swimming pool tile joints.
Vetonit Pool Grout is an improved cementitious grout with the additional characteristics of reduced water adsorption and high abrasion resistance (as per ISO-13007-3 class CG2 WA). It is composed of hydraulic binders, selected aggregates, special additives, and polymers. And is supplied as a dry powder in pre-weighed bags ready to use on-site, requiring only the addition of clean water to produce easily workable mortar. Vetonit Pool Grout is ideal for joining ceramic tiles and marble. Vetonit Pool Grout should be applied at a thickness of 2 - 4 mm for wall tiles and 3 - 8 mm for floor tiles.
Uses
- Pool Grout is specifically designed for grouting in submerged conditions. This includes all types of tiles for swimming pools, fountains, water tanks, etc.
- Ideal for grouting wall and floor joints subject to a varying range of dry or humid conditions.
- Suitable for all tile types used in pool areas.
Advantages
- Factory-controlled pre-blend ensures consistently high quality.
- Requires only the addition of water on-site at the time of usage.
- Easy tile installation that enables high productivity.
- Superior workability.
- Excellent bonding on a variety of swimming pool tiles available in the local market.
- Water & weather-resistant.
- Suitable for internal & external applications.
- Suitable for horizontal & vertical surfaces.
Usage Instructions
Remove all tile adhesive excess that is at a level higher than half of the tile thickness.
All the joints should be free from dust, loose materials & traces of foreign materials, etc. Neutralise the tile’s joint water absorption by applying clean potable water. Do not leave water pooling in the joints
For the preparation of Vetonit Pool Grout mortar, pour 7 - 8.5 litres of water into a container then add the powder from the 25 Kg bag of Vetonit Pool Grout.
Mix with a low-speed electric drill fitted with a suitable paddle until a uniform, lump-free consistency is achieved. Allow the mixed material to stand for about 5 - 10 minutes and remix briefly without adding water.
You can blend Vetonit Pool Grout manually for small quantities, however, you must maintain the correct ratio of powder to water. Do not add water to the mixture once the mortar adhesive begins to harden.
Apply Vetonit Pool Grout using either a rubber blade, a grouting trowel, a rubber spatula, or a sponge.
Spread the mixed grout diagonally across the tile joints and firmly press it with a rubbing pad covered with a sponge rubber spatula to ensure filling all the gaps. Remove excess grout that remains on tiles using the same tool.
After 15 - 30 minutes, the grout should be initially dry (depending on the ambient temperature & humidity). You can then clean the tiles and remove all excess material with a damp sponge. After fully drying, clean the surface of the tiles with a dry cloth or disposable cotton towels.
Keep the grout moist from time to time for the first 2 days after application to achieve optimal hardening.
When washing & drying the tiles, avoid rubbing the tile joints too deep. For further information regarding the suitable substrates and tiles on which this product can be safely applied, please contact Saveto’s technical department.
Clean tools and equipment with water immediately after use. Remove the hardened material using mechanical means.
DOWNLOADS
EXPLORE MORE PRODUCTS
Porcelain Plus
Highly flexible, polymer-modified cementitious adhesive for large porcelain tile slabs.