PVA copolymer based high-quality putty
Saveto Putty Fine is a water-based putty. It is supplied as a wet putty in the pre-weighed pails or bag ready to use on-site. Saveto Putty Fine is a high-quality product as a thin underlayment to repair undulations and provides a very smooth surface finish ideal for subsequent application of paint & decorative coatings. Saveto Putty Fine can be applied generally in thickness less than 0.7mm.
Saveto Putty Fine is supplied in 20 kg plastic pails.
Coverage:60 - 120 m2 /20kg depends on the substrate.
Stated consumptions data are for general guidance. Actual consumption depends on the nature of the substrate, method of application and wastage.
Original sealed containers of Saveto Putty Fine has a shelf life of 18 months provided it is stored clear of ground in a dry shaded place between 5 ºC up to 39º
Saveto Putty Fine is generally applied in single or double coats.
Apply Saveto Putty Fine to the substrate by pressing the putty firmly, work the mixed material to a smooth level using a flat trowel.
Apply a second coat as necessary once the first coat has fully dried.
Once Saveto Putty Fine is applied, It is recommended to apply one coat of alkali-resistant primer followed by two coats of acrylic emulsion paint or other suitable coatings.
Saveto Putty Fine is self-curing and does not require water treatment.
All tools should be cleaned immediately after finishing with water. Hardened materials can be cleaned mechanically.
The surface should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc. For previously painted surfaces, remove the old paint prior to the application of Saveto Putty Fine.
Allow wet surfaces to dry completely prior to the putty application.
Avoid direct contact of Saveto Putty Fine with eyes or skin. It is recommended to use protective gloves and goggles during application. Any skin contact should be wash with soap & water. In case of eye irritation, immediately wash with a copious amount of clean cold water. Seek medical advice.
Saveto Putty Fine is non-flammable.
For further information, please refer to the material safety data sheet.
Saveto endeavors to ensure that any advice, recommendations, information it may give, is accurate and correct. It cannot accept any liability either directly or indirectly arising from the use of its products, because it has no direct or continuous control over where or how its products are applied, whether or not in accordance with any advice, specification, recommendation or information given by us. Saveto has the right to change any of the specifications mentioned in the Technical data sheets upon its discretion without prior notification.
Hard copies of TDSs are printed once or twice a year, while our technical data sheets are continuously being updated as per R&D improvements and new 3rd party testing; kindly refer to our website for the latest updated TDSs.
Gypsum surfaces skim and finish compound
High quality premixed surface crack filler
Water resistant internal use premix smooth cement coating
Water resistant external use premix smooth cement coating
Premium quality premixed compound for gypsum board joints
Multipurpose universal cementitious non-shrink grout