تجاوز إلى المحتوى الرئيسي
Submitted by webmaster on 6 June 2024

ڤيتوبروف آى ام 768

غشاء عزل مائي أكريليكي يسمح بمرور الهواء.

Vetoproof AM768 is a monolithic, elastomeric, synthetic air barrier membrane designed to be rolled, sprayed, or troweled onto exterior above-grade wall assemblies to mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor. It may also be used as a liquid-applied flashing.

الاستخدامات

  • Exterior sheathing panels, concrete block, poured concrete, wood substrates. 
  • Insulated Concrete Forms (ICF).

المزايا

  • UV-stable, seamless, monolithic membrane that creates a fully adhered air barrier when properly installed.
  • Roller, spray, or trowel application for faster installation.
  • Retards air and bulk water migration yet remains vapor permeable. 
  • UV-resistant for exposed rainscreen or construction applications. 
  • Available in custom colors to meet design requirements. 
  • Approved as a water resistive barrier for Insulated Concrete Forms (ICF).

تعليمات الاستخدام

All surfaces should be dry and free from contamination, such as oil, grease, loose particles, decayed matter, moss, algal growth, laitance, and all traces of mold release oils and curing compounds. This is best achieved by lightly gritblasting the surface. Where moss, algae, or similar growths have occurred, treatment with a proprietary biocide should be carried out after the grit-blasting process. Spalled and deeply disintegrated concrete should be removed to sound concrete and repaired with a Saveto repair system. 

Concrete substrates should be at least 14 days old; bituminous substrates should be at least 12 months old before overcoating with Vetoproof AM768.

Apply Vetoproof AM768 with a roll, trowel, or airless spray machine. Apply the first coat of Vetoproof AM768 and allow it to dry for 6-12 hours, depending on the ambient temperature.

Remove Vetoproof AM768 from tools, equipment, and mixers with clean water before the initial set. Cured material can only be removed mechanically.

  • Vetoproof AM768 should not be applied at ambient temperatures below 5°C. 
  • Do not apply it to damp, contaminated or frostcovered surfaces. 
  • The membrane must be protected from rain and washout prior to drying. 
  • Vetoproof AM768 is not to be applied directly to fireproofing materials.
  • Keep the product from freezing prior to application. It is best to store Vetoproof AM768 off the floor at an ambient temperature above 10°C.
  • If any doubts arise concerning application or substrate conditions, consult Saveto team.

تحميل

استكشف المزيد من المنتجات

ڤيتوبروف إس

مادة ذات أساس إسمنتي مكونة من مركبين مرنة مجسرة للشقوق وعازلة للماء

ڤيتوبروف يو ام 765

عزل مائي من البولي يوريثان الممتد بالقطران مكون واحد.

ڤيتوبروف اي سي 761

طلاء إيبوكسي قطراني بالفحم خالٍ من المذيبات.