Vetoproof EC761

The surface should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc.

Laitance and weak surface layer shall be removed using mechanical methods such as grinding or blasting to provide a sound, well-profiled surface. Repair all necessary repairs before application by using epoxy mortar from the Vetorep ER range. Pinholes, blowholes, and minor irregularities can be leveled and filled by Vetorep ER350.

New concrete floors shall be at least 28 days old with a moisture content of less than 5% (shall earlier application be required testing of substrate for moisture conditions shall be made).

Blast grit steel substrates to surface quality SA2½ (BS 4232:Second Quality), and application shall occur within 2 to 4 hours after blasting.

Thoroughly stir the individual components of Vetoproof EC761 before the two are mixed. Pour the entire contents of the hardener container into the base container and mix the material thoroughly for at least 3 minutes. The use of a heavy-duty slow speed, flameproof, or air-driven drill fitted with a mixing paddle is desirable.

Thoroughly stir the individual components of Vetoproof EC761 before the two are mixed. Pour the entire contents of the hardener container into the base container and mix the material thoroughly for at least 3 minutes. The use of a heavy-duty slow speed, flameproof, or air-driven drill fitted with a mixing paddle is desirable.

Allow the applied to cure for 7 days to achieve full cure to receive its chemical resistance properties.

Remove Vetoproof EC761 from tools and equipment with Vetonit Solvent XX400 immediately after use. Remove hardened material mechanically.