ڤيتوبروف سي ام 741

All surfaces where Vetoproof CM741 has to be applied must be clean and have an open capillary system. Eliminate laitance, dirt, grease, and other loose materials utilizing high-pressure water jetting or wet sandblasting. Defective concretes such as cracks and honeycombs, etc., have to be chased out and repaired before the application. Also, make sure that all surfaces must be damp but not totally wet before progressing the work.

If the application method is by using a masonry brush, mix 7-7.5 liters of water with 25kg of Vetoproof CM741, while when using a power-spray gun, prepare a mixture of 8 – 8.5 liters of water with 25kg of the product.

Mix only as much product as necessary and ensure to stir the mixture regularly. If the mixture starts to set, it is not advisable to add more water; instead, re-stir the prepared mixture to reinstate its workability.

Apply Vetoproof CM741 into two coats with the use of a masonry brush or power-spray gun. Make sure to apply the second coat while the first coat is still “green”. 

Keep all areas where Vetoproof CM741 is applied damp, protected against direct exposure from sunlight, wind, and frost by covering the area with polythene sheeting, damp hessian cloth, etc., for a period of 5-7 days. 

Ensure that the period between applying the first and second layer is between 3 – 4 hours at a temperature of 20°C.

Clean all tools employed to apply Vetoproof CM741 with water before it hardens; otherwise, mechanical means are needed.