Vetoproof AM763

All surfaces should be dry and free from contamination, such as oil, grease, loose particles, decayed matter, moss algal growth, laitance, and all traces of mold release oils and curing compounds. This is best achieved by lightly grit-blasting the surface. Where moss, algae, or similar growths have occurred, treatment with a proprietary biocide should be carried out after the grit-blasting process. Spalled and deeply disintegrated concrete should be removed to sound concrete and repaired with a Saveto repair system.

Concrete substrates should be at least 14 days old; bituminous substrates should be at least 12 months old before overcoating with Vetoproof AM763.

Apply Vetoproof AM763 with a brush, roll, or airless spray machine. Prime Porous cementitious surfaces with Vetoprime AP443. Apply the first coat of Vetoproof AM763 and allow it to cure for 4 - 12 hours, depending on the ambient temperature.

Apply the second coat perpendicular to the first coat

It is recommended for heavy pedestrian traffic to use fiberglass scrim reinforcement, embeded firmly in the second coat while wet, and a third coat should be applied.

Remove Vetoproof AM763 product from tools, equipment, and mixers with clean water before the initial set. Cured material can only be removed mechanically.