Multipurpose drywall skim surfaces and joints compound.
Vetogyps Compound is a drywall filling and finishing coat ready-to-use on-site. Vetogyps Compound is a high quality air-drying compound suitable for the final coating of gypsum board joints, angles and fastener heads when used in conjunction with Vetonit Gypsum Joint compound.
Uses
Suitable for jointing and coating gypsum board angles and fastener heads.
Suitable for use as a skim coat for dry gypsum surfaces and gypsum boards surfaces.
For internal application on both horizontal and vertical dry gypsum surfaces, as well as gypsum board surfaces.
Advantages
Factory controlled pre-blend ensures consistently high quality.
Ready to use and easy to apply, with minimal mixing and cleaning of tools.
Premium grade, all-purpose or finishing compound.
Used for all three coats or as a skim and finish coat.
Excellent workability, easy application by hand or with mechanical tools.
It can be sanded by hand or with mechanical sanding tools.
Keep Vetogyps Compound containers at room temperature for 24 hours before application. Use directly from the container. Stir contents lightly if needed.
Apply Vetogyps Compound over dry gypsum surfaces and gypsum board surfaces either manually or by spray machine. When using Vetogyps Compound for skim coating, work the mixed material to a smooth level using a putty knife. Allow each coat to dry completely before recoating and sanding. Sand Vetogyps Compound surface with care using grit paper. The final coat should be applied to a smooth finish.
Apply compound to both corner sides using a putty knife. Fold tape along the center crease. Press into position. Embed tape with a putty knife. Remove excess compound and apply a thin coat over the tape. Let dry and apply a second coat on one side. Let dry and then cover the other side. When dry, sponge smooth if necessary.
