Water-proof epoxy tile adhesive (Water-cleanable and chemical-resistant)
Vetoset EA454 is a three-component, epoxy-based, water-cleanable, chemical-resistant, and waterproof tile-setting adhesive with improved characteristics and slip resistance. It is suitable for use with most types of tiles, including ceramic, porcelain, glass mosaic, marble, granite, etc. The product is composed of three components: a resin base, a hardener, and selected fillers.
Uses
Laying virtually all types of tiles to cementitious and metal substrates.
The substrate should be sound, clean, and free from loose material, grease, laitance, dirt, curing-compounds (or any other substance that might impair bond quality with the substrate)
To ensure proper mixing, use a mechanically powered mixer or heavy-duty slow speed drill fitted with a suitable paddle. Stir the base (component A) and the hardener (component B) individually to disperse any settling material. Pour the entire contents of the base and the hardener into a suitable sized container and mix (mechanically) for 2 minutes. Add the Filler (component C) and mix for 3 more minutes until a uniform and lump-free consistency is achieved.
Apply a thin layer of the adhesive onto the substrate using the flat edge of a trowel. Comb the adhesive with a suitable notched trowel to achieve a bed thickness of 2 - 6 mm. Then place the tiles and press them firmly to ensure proper contact with the adhesive. (It is always better to work in a manageable area that can be tiled within the adhesive’s open time). Leave tiled surfaces for 24 hours before grouting.
Contact Saveto’s technical department for more information regarding the suitable substrates and tile types on which this product can be safely applied.
